Soybean quality preferences by the Beninese small-scale soy food processors using conjoint analysis

Soybean is a food crop with a growing interest in Benin. This study aims to provide insight about the main quality characteristics of the grain preferred by small-scale soy processors and the main socio-economic factors which drive their preferences. 116 small-scale processors related to three main soy food products - “Soy Amon” (soy cheese), “Soy Afitin” (soya fermented condiment) and “soymilk” were asked to express their preferences about important soybean grain properties regarding their activity. Collected data were processed using a conjoint based preference analysis. “Density of the grain” appears to be an important quality criterion for the processors, whatever the soybean food produced. Less important attributes are “use of inoculant”, “use of fertilizer”, “soybean production origin”, “soybean provider”, depending on the soy food produced. Moreover, soy Afitin producers dislike soy grain distributed by “individual farmers” and prefer “support organization" as providers, in contrast to soy cheese and soymilk producers. Regarding the social and economic factors influencing the processors’ preferences for grain provided by farmers, processors whose main activity is “merchant” are probably not favorable to soy sold by farmers and the higher the purchase frequency is, the more the processor is likely to buy soy from farmers. intent from producers is modeling as a binary decision (1=favorable or 0=not favorable). the set of parameters to be estimated, reflect the impact of changes in x on the probability of selling or not and channel choice decision and ε is the independently distributed error term assumed to be normal with zero mean and constant variance. Based on the literacy of factors that influence consumer preferences and the results of the group discussion with processors, the following dependent variables were used: Merchant as main activity (Mermain), Household size (Hsize), monthly revenue (mrevenue), part of revenue allocated to soybean processing activity (Prevenue), the price (Price), the frequency of soybean purchase (Frequency), the education level (education) and the credit (Credit). In summary the model can be specified as


INTRODUCTION
Soybean is one of the most consumed plant-based proteins worldwide. Nowadays, soy foods have become a popular choice of many health-conscious people, valued for their versatility, taste, nutritional content, environmental advantages and health benefits (Bolla, others (Bolla, 2015). In the least developed countries like Benin, soybean consumption is suggested in response to the food security issues that poor people are facing (Kpenavoun et al., 2018). Beninese soybean production has increased from 5,000 tons in 2002 to 80,000 tons in 2012and 99,738 tons in 2014(INSAE, 2016. Because soybean is a highly nutritious crop with high economic value, there has been a growing interest in its production in Benin as in many other West African countries (Wendland and Sills, 2008). In addition, soy products offer a cheaper source of protein for the low-income population (Floquet et al., 2013). Nowadays, the Beninese government sees soybean value chains as an important economic driver. The artisanal processing of soy is an additional source of income for rural people, and the products derived from soy are very appreciated by consumers. In Benin, the most common products derived from artisanal processing are soy cheese "Amon soja", soy fermented condiment "Afitin soja" and soymilk "Lait soja". These activities contribute to improving the livelihood of many rural households across the country. However, processors are facing difficulties to differentiate the soy varieties available on the market, and often buy a mix of varieties for their processing purpose (Hounhouigan et al., 2020). This practice affects the processing efficiency and the quality of the end-product. Using a conjoint based preference analysis, this paper tries to provide insight about the most important quality characteristics and drivers of soybean varieties for the most important artisanal food processing purpose in Benin.

Soy products description
This study focuses on the three most consumed food products from soy sources, which are semi-handcrafted.
-"Soy Amon" is a soy cheese derived from soymilk coagulation, similar to tofu. It is generally valued by low revenue people and urban people who cannot afford other ordinary soy cheese derived from cow milk. It is a ready-to-eat food consumed as a protein source in meals.
-"Soy Afitin" is a fermented condiment made from dehulled and cooked soybean and used as a taste exhauster in the traditional dishes, mainly the sauces. "Afitin soja" is found as is or blended with African locust bean condiment "afitin" and sold in market or along the roads by rural producers.
-"Soymilk": is a drink derived from ground and heated soybeans, stabilized to be stored in bottles for sale. It is highly appreciated by consumers. It has made arise some new businesses as the interest in it is increasing among both local and foreign people. It has a good potential for rural entrepreneurship.

Conjoint based preference test
To prefer a product is to choose it among various possibilities and proposals. A choice can be difficult to perform or not, but whatever its nature, the individual will almost always adopt the same approach. They will assess the different possibilities available to them based on criteria (which can be very diverse) and choose the one that seems the most adequate to them. When the criteria are quantifiable or logical, the theory of discrete choice models can be used (Bierlaire, 2007). A discrete choice is any choice made from a limited set of mutually exclusive alternatives. The standard microeconomic approach postulates two hypotheses that describe "perfect rationality". It is firstly assumed that each individual has a full and transitive preference relationship so that all actions can be compared and arranged. Secondly, each individual is assumed to always choose the action they prefer to all others. In contrast, discrete choice models assume that an individual"s choice behavior is not necessarily in accordance with the model of perfect rationality. At the origin of this disagreement, several reasons have been mentioned (Billot and Thise, 1995): the fluctuation during the process assessment, the individual"s ignorance of the state of their preferences, and the error of appreciation.
Several models have been proposed in the literature, to explain factors affecting the buyer"s preference for food. Among these models, the multi-attribute approach is one of the most widely referenced in the literature (Engel and Blackwell, 1982), and seems to be the most suitable for the purpose of soybean varieties choice for processing. The multi-attribute model is derived from a conceptual basis in social psychology (Fishbein, 1967), psychometrics (Torgerson, 1958), and the new economic theory of consumer choice formulated by Lancaster (1966). The model views products as bundles of characteristics and assumes that these characteristics generate utility for consumers. Thus, the preference can be explained by the utility drawn from the characteristics. This implies that the overall utility derived from a product is decomposed into separate utilities, and each pertains to a characteristic (Louviere, 1994). Lancaster"s new consumer economic theory of demand for characteristics provides the theoretical basis of the model of consumer preferences used in this study. Indeed, Lancaster argues that consumers derive utility from the characteristics after the processing of the products into completed meals using labor, time, and perhaps other inputs. Lancaster assumed that g(x) is linear. In addition, he postulates that the technology that transforms a product x into attributes is the same for all consumers. Finally, this study targeted the products that yield common characteristics. This hypothesis corresponds to the separability assumption, usually made in empirical consumer demand analysis (Rao, 2007;Ratchford, 1975). To assess actor preferences, conjoint analysis was used as it is generally recognized as the most frequently used approach in marketing research for measuring consumers" preferences (Green and Srinivasan, 1978). Conjoint analysis is a statistical technique for decomposing a consumer"s preferences into part-worth associated with each attribute of the product. A part-worth can then be recombined in various ways to predict a consumer preference for a product. An alternative approach is the direct analysis of aggregated choice, among experimentally controlled choice sets (Elrod et al., 1992), but it cannot measure part-worth at the individual consumer level. Within conjoint analysis methods, the full-profile method is the most common. According to Green and Srinivasan (1978), it provides a realistic description of the profile and takes into account the potential environmental correlations between factors in real stimuli. The model used to capture the preferences composition is a part-worth model, as it provides greatest flexibility in allowing different shapes for the preference function along each of the attributes, and is also compatible with any arbitrary shape for preference function (Green and Srinivasan, 1978).

Conjoint implementation for soybean processors choice
To express their preference concerning a food product, buyers consider several characteristics, such as its sensory characteristics, its nutritional value and its impact on health (Muchenje et al., 2008(Muchenje et al., , 2009. In contrast to food scientist view of the quality and safety of a product, the buyer conception of the product is more subjective (Katiyo et al., 2020). The quality of food can be broadly divided into two quality attributes: visual quality and eating quality (Pieterse et al., 2019). The former is the determining factor in the consumer"s decision to buy a product, while the latter determines whether a consumer will re-purchase a product (Qiao et al., 2002). Another classification attempt is to separate the food characteristics into two categories: intrinsic and extrinsic. Intrinsic cues relate to physical product characteristics (e.g. color, smell, texture) whereas extrinsic cues relate to the product but are not physically part of it (e.g. brand, quality stamps, date label, origin, packaging, production and processing information, price, place of purchase, media information, anecdotes) (Djekic et al., 2018;Font-i-Furnols and Guerrero, 2014). For the purpose of this study, we focus on the visual and both intrinsic and extrinsic characteristics, which are easily valuable by processors in a buying context.
As suggested by Braun and Srinivasan (1975), a preliminary step for a conjoint study is questioning consumers regarding the attributes that are important to them. This usually helps in identifying the attributes that are most frequently regarded as relevant. In this way, focus group discussions as suggested by Kelly (1955) are important in building consensus around actors" Hounhouigan et al. 515 preferred traits but it may hide individual preferences that are important in various choices. Focus group discussion and literature review are used to identify the most important traits for each category of actors. There could be two possibilities for the conjoint: rating or ranking based conjoint and direct choice based conjoint. Rating or ranking format uses a model in which individual-level models are fit to ratings of full profiles. Direct choice format estimates an aggregate multinomial logit model using choice data (Louviere and Woodworth, 1983). In this study, the focus group discussion was complemented by individual interviews for ranking and scoring of preferred varietal traits (Bellon, 2006).

Area of the study
The area of the survey is in the central part of Benin, mainly in the municipality of Bohicon where all actors are concentrated. The interviews were conducted with the three categories of processors (soy Afitin, soy cheese and soymilk). Firstly, a focus group with each category of actors cited above, was organized to identify the most important attributes for each category of producers. Secondly, a structured interview was held, with a sample of 116 processors (58 soy cheese producers, 21 soymilk producers and 37 soy Afitin producers) randomly selected from a list of cooperatives. The interview was conducted in two steps. The first category of questions was related to general socio-economic and demographic information and a second category was related to the preferences. At this step, the soybean profiles were presented to respondents, who were asked to express their opinion and to rate each profile according to their preference. For the preference assessment, a 3level Likert scale was used, with level 1 for less preferred, 2 for middle preferred and 3 for most preferred. For the rating, processors were asked to value the profile from 0 to 10, the level 0 representing the lowest score and the level 10 the highest score. The respondents" distribution by municipality is indicated in Table 1.

Experimental design
A final validating survey was conducted, consisting in focus groups with each category of actors, in order to confirm the data collected before. The focus group run with the key actors suggested that eight attributes can possibly influence variety choice by actors. These are summarized in Table 2.
For the conjoint data collection, two methods are usually used: the two-factor-at-a-time procedure, and the full-profile approach. In this study, the full-profile method seems to be ideal as it utilizes the complete set of factors. A profile can be defined as a hypothetical soy variety, which can be described on a card, using pictogram or verbal description. According to Green and Srinivasan (1978), the main argument that seems to favor the full-profile approach is that it gives a more realistic description of the variety by defining the levels of each of the factors and possibly taking into account the potential environmental correlations between factors in real stimuli. The use of the full profile allows generating 72 cards according to the formula: (1) with all effect/interaction captured, distributed in 4 blocks of 18 profiles.

Data analysis method
The utility values and the scores were estimated using the SPSS 23 software"s conjoint command. An analysis of variance and a Turkey post-hoc test were performed to assess the differences between the groups of processors preferences. The social, economic and demographic factors which affect processors" purchase intent were investigated using a probabilistic model also called probit model (Chalwe, 2011). It allows appropriate estimation for the investigation of the effects of explanatory variables on dichotomous dependent variables (Amemiya, 1981). The model is a popular specification of a generalized linear model, using the probit link function and generally specified as: where β is a parameter to be estimated, and Φ is the standard normal cumulative distribution function (cdf). The probabilities of probit models lie between 0 and 1 and they compel the disturbance terms to be homoscedastic (Chalwe, 2011). The underlying model is: ( where ε is the error term, with N (0,), α and β are parameters to be estimated. With a realization that Yi = 0 if Yi* ≤ 0, and Yi = 1 if Yi* > 0. It follows that For soybean processors, the purchase intent from producers is modeling as a binary decision (1=favorable or 0=not favorable). β is the set of parameters to be estimated, which reflect the impact of changes in x on the probability of selling or not and channel choice decision and ε is the independently distributed error term assumed to be normal with zero mean and constant variance. Based on the literacy of factors that influence consumer preferences and the results of the group discussion with processors, the following dependent variables were used: Merchant as main activity (Mermain), Household size (Hsize), monthly revenue (mrevenue), part of revenue allocated to soybean processing activity (Prevenue), the price (Price), the frequency of soybean purchase (Frequency), the education level (education) and the credit (Credit). In summary the model can be specified as follows: Where = probability to purchase soy from farmers.

Soy processors' preferences
The utility values obtained for each attribute are presented in Table 3. For soy Afitin producers, the desired soybean should be: no inoculant used (0.16), with high density (0.715), coming from the North of the country (0.036), distributed by NGO (0.018) and with no chemical fertilizer used (0.026).
As far as (soy cheese) producers are concerned, the ideal soybean should be with inoculants used (0.014), high density (0.708), originate from the North (0.016), distributed by producers (0.026) and with no fertilizer used (0.016). For soymilk producers, the characteristics of a good soybean are: with inoculant used (0.006), with high density (0.674), coming from elsewhere (0.012), distributed by producers (0.012) and with no fertilizer used (0.073). The Kendall coefficient W is high for the 3 groups, respectively 0.715, 0.656 and 0.73 for soy Afitin producers. soy Amon producers and soymilk producers (Table 4). This shows a good  concordance in the ranking of each group with p-values significant at 1%. It appears that the grain density is the most valuable criteria for the three groups with the scores of 73.493, 76.581 and 71.213 respectively for soy Afitin producers, soy Amon producers and soymilk producers.

Differences among processors' preferences
The ANOVA test results (Table 5) show no difference in the preferences expressed for inoculants, density, origin, chemical fertilizer among the three actors groups. Meanwhile for distribution, some differences occurred (Prob <0.05), with a specific difference between (soy cheese) and soy Afitin producers (estimated marginal means 0.03247; p<0.05) ( Table 6). Soy cheese producers like soy distributed by farmers, contrary to soy Afitin producers who dislike it and prefer the one provided by the NGOs. Soymilk producers are also favorable to soybean coming from farmers.

Factors influencing the processors' preferences for grain provided by farmers
The model estimation results (Table 7) show a global significance (p<0.05) with a high pseudo R2= 65,98. Merchant as main activity (p<0.01) and the frequency of soybean purchase (p<0.05) appears to have a significant influence on the preferences. Indeed, processors whose main activity is "merchant" are probably not favorable to soy sold by farmers (B= -0.508 (0.291)) and the more frequency of purchase is high, the more the processor is likely to buy soy from farmers (B=0.347 (0.179)).

DISCUSSION
The density of soy grain is an important criterion for soybean processors" choice. It is highly valued mainly because of the positive correlation between the grain density and the matter yield after grinding. Wu and  Table 6. Results from Tukey post-tests comparing the differences between groups of the significant attributes from the ANOVAs.

Standard
error Probability

Distribution Farmers
Soy cheese producers (  Bergquist (1991) and Schuler et al. (1995) confirm the relation between wheat and corn grain weight/density and the flour quantity. Thus, as processors are seeking the highest possible revenue, the more volume the ground soy has, the more money they gain. The scores obtained for the other characteristics are low. However, they have a relative influence on the processors" choices. These characteristics are related to the type of fertilizer used, the region of origin of the grain and the supplier. Soy Afitin producers are refractory to soybean with inoculant while soymilk and soy cheese producers are seeking that. The three groups of processors dislike soy grown with chemical fertilizers. In fact, farmers often combine the inoculant and NPK fertilizer to boost the yield. The combination of inoculant and phosphate fertilizer appears to have a positive effect on grain yield (Agnoro, 2008), and the nitrogen fertilizer is proved to potentially improve the soybean productivity with no effect on the grain quality characteristics (protein, oil and fibre) (Sawyer and Barker, 2013). However, the effect of the combination of the NPK and the inoculant is not well documented. We rely on the processor"s observation and postulate that the NPK has a negative effect on the three end-products" quality. As far as region of origin of the soy is concerned, soy Afitin and soy cheese producers appreciate soy coming from the north of the country and soymilk producers prefer soy coming from elsewhere. This preference is related to the quality of the grain which is strongly related to the quality of the soils. Indeed, in the southern and central parts of the country, the soils have very low cation exchange capacities and are therefore poor compared to the north of the country (Igue et al., 2013). It appears that there is not a significant difference between the processors" preferences of the characteristics, except for the supplier "Farmers". In fact, soy Afitin producers dislike soy grain distributed by farmers and prefer NGO sources, in contrast to soy cheese and soymilk producers. According to de Jonge et al. (2008), a higher level of trust in institutions and organizations is associated with a higher level of confidence into the product.
Moreover, the consumers compensate the lack of knowledge they have about the cultivation and production process of foods by trusting actors of the food chain (such as farmers, retailers and manufacturers) as well as regulatory (Berg, 2004;Green et al., 2003;Siegrist and Cvetkovich, 2000;Van Kleef et al., 2006). The results reveal a trust of soymilk and soy cheese processors into farmers, which could be explained by the strong social relationships between farmers and processors. Soy Afitin producers meanwhile, have a high quality exigence, which could only be fulfilled by the NGO trust. This is probably because they have been supported for a longtime by some NGO"s and finally built a strong trust relationship with them. The main activity "merchant" and the "frequency of purchase" appear to have a significant effect on the processor"s choices. These results are in adequation with the findings of Suwannaporn and Linnemann (2008) about the importance of marketing activity for the rice type consumption and those of Laizer et al. (2018) about the frequency of purchase importance for the rice grain choice for consumption. In contrast, this is not in adequation with the findings of Priyadharsini et al. (2017) who found that household size, education and price are the main factors which influence the preferences for protein products such as soymilk and meat.
Although all the above cited aspects are important to consider in order ensuring the availability of appropriate soy grain for processors, the importance of the extension processes should not be neglected. Indeed, the goals of extension are to transfer knowledge from researchers to farmers, to advise the latter farmers in their decision making and to educate them on how to make better decisions, to help them clarify their own goals and possibilities (Van den Ban and Hawkins, 1996). In most cases, the "Non-farmers innovators" (Researchers) do not provide new technologies with adapted extension tools that can help farmers apply them to improve their productivity (Mgumia, 2004). In the case of soy grain usage for small-scale processing in Benin, the extension service, which is mainly composed of public services and NGOs, should act after a breeding process to disseminate the new varieties. Conservation is also an important step for the final quality of the grain. However, soy grain is less exigent in storage condition than other food crops. Also, the dose of fertilizer could influence the grain conservation. This will probably be investigated by further studies.

Conclusion
Soy food producers are mainly seeking varieties with high grain density and no chemical fertilizer used. Depending on the type of end product, there are differences between the preferences for the other attributes. However, the differences are significant only for the supplier attribute "Farmer": soy Afitin producers dislike soy grain distributed by farmers and prefer NGO sources, in contrast to soy (soy cheese) and soymilk producers. As perspectives, further studies should be oriented to a better understanding of the effect of NPK, Nitrogen fertilizer and inoculant on soy food products. Efforts in the framework of these activities in Benin should be oriented to the promotion of high-density varieties with a low use of chemical fertilizer. At last, since the physical characteristics of soy food are difficult to distinguish, effort should also be made for varietal zoning, to allow processors easily find the suitable grain for their activities. To such end, research should be made to establish the link between the physical properties and the technological characteristics of the varieties. Afterwards, there should be a package of actions to be implemented, starting from a breeding system to the extension and validation of the new varieties by processors to ensure the availability of the most suitable and homogeneous grains for the soybean food processors in Benin.