Adedeji YMD, Ajayi B (2008). Cost-effective Composite Building Panels for Walls and Ceilings in Nigeria. Proceedings of IIBCC- 11th International Inorganic-Bonded Composite Conference, Madrid, Spain, Nov. 4th-7th.

Ajayi B, Fuwape JA (2005). Influence of Additive Concentration and Wood Species on Dimensional Stability of Cement-bonded Flake-board. Journal of the Institute of Wood Science 17(97):34-40.
Crossref

Ajayi B (2000), Strength and Dimensional Stability of Cement-Bonded Flake board produced from Gmelina arborea and Leucaena leucocephala. Ph.D. Thesis in the Department of Forestry and Wood Techology, Federal University of Technology, Akure.

American Society for Testing and Materials (ASTM) (2005). American Society for Testing and Materials. Annual Book of ASTM standards. 100 Barr Harbor Dr., West Conshohocken, PA 19428, ASTM D570-98, pp. 35-37.

Auke K, Jaap K (1997). Agricultural and Forest Residues -Generation, Utilization and Availability. Regional Consultation on Modern Applications of Biomass Energy, 6-10 Jan. 1997.

Badejo SOO (1989). Influences of Pre-treatment Temperature and Additive Concentration on the Properties of Cement-bonded Particleboard from Plantation-grown Tropical Hardwoods. Tropical Science 29:285-296.

Bratkorich SM, Gephart JS (2000). Green dimensioning below grade red oak logs: A Minnesota case study. Forest Products Journal 50(2):65-68.

Institute for Tests and Research of Building Materials (IKOB) (2002). Tests on Wood Strand Cement Board - EltoBoard. Testing report provided by Eltomation BV

Li W, Shupe TF, Hse CY (2004). Physical and mechanical properties of flakeboard produced from recycled CCA-treated wood. Forest Products Journal 54(2):89-94.

Ma LF, Yamaguchi H, Pulido OR, Sasaki H, Kawai S (2002). Production and properties of orientated cement-bonded boards from sugi, in Wood-Cement Composites in the Asia-Pacific Region, ed P.D. Evans, ACIAR Proceedings No. 107. Australian Centre for International Agricultural Research, Canberra, pp. 140-147.

Ogunrinde OS, Owoyemi JM (2015). Sustainable Management of Nigerian Forest through Efficient Recovery of Harvesting Residues. ISROSET-International Journal of Scientific Research in Multidisciplinary Studies 01(02):2454-6143

Ogunrinde Y (2012). Flexural and Thickness Swelling Properties of Cement Bonded Ceiling Board from Waste Paper. B.Tech project, Dept of Forestry and Wood Technology. B.Tech project, Department of Forestry and Wood Technology.

Ogunwusi AA (2012). The Forest Products Industry in Nigeria. International Multi-disciplinary Journal, Ethiopia 6(4):191-205
Crossref

Owoyemi JM, Ogunrinde OS (2013). Suitability of Newsprint and Kraft Paper as Materials for Cement Bonded. International Journal of Chemical, Materials Science and Engineering 7(9):1063-1067.

Oyebo MA (2006). History of forest management in Nigeria from 19th century to date. In: Ayobami T. S. (ed.), Imperatives of space technology for sustainable forest management. Proceedings of an international stakeholders' workshop sponsored by National Space Research and Development Agency held In Abuja, Nigeria between 27 and 28 March 2006, pp. 1-14.

Sadiku N (2012). Physico-mechanical characterization of wood plastic composite produced from some tropical wood species, M.Tech project, Department of Forestry and Wood Technology, Akure.

Semple KE, Evans PD (2004). Wood cement composites-Suitability of Western Australian mallee eucalypt, blue gum and melaleucas, RIRDC/Land and Water Australia/FWPRDC/MDBC

Simatupang MH, Kasim A, Seddig N, Smid M (1991). Improving the bond between wood gypsum. Proceedings of the Second International Inorganic Bonded Wood and Fiber Composite Materials For Product Resources Society. Madison Wis. pp. 61-69. In: Moslemi AA. (Ed).