Journal of
Chemical Engineering and Materials Science

  • Abbreviation: J. Chem. Eng. Mater. Sci.
  • Language: English
  • ISSN: 2141-6605
  • DOI: 10.5897/JCEMS
  • Start Year: 2010
  • Published Articles: 94

Full Length Research Paper

Structural properties of high density polyethylene matrix composites reinforced with open air and furnace rice husks ash

Jonathan M. K.
  • Jonathan M. K.
  • Department of Physical Sciences, Faculty of Science, Engineering and Technology Chuka University, Kenya.
  • Google Scholar
Osamong G. A.
  • Osamong G. A.
  • Department of Physics, Faculty of Science, Egerton University Egerton University, Kenya.
  • Google Scholar
Butembu S.
  • Butembu S.
  • Department of Physics, Faculty of Science, Egerton University Egerton University, Kenya.
  • Google Scholar
Kamweru P. K.
  • Kamweru P. K.
  • Department of Physics, Faculty of Science, Egerton University Egerton University, Kenya.
  • Google Scholar
Gichumbi J. M.
  • Gichumbi J. M.
  • Department of Physics, Faculty of Science, Egerton University Egerton University, Kenya.
  • Google Scholar
Ndiritu F. G.
  • Ndiritu F. G.
  • Department of Physics, Faculty of Science, Egerton University Egerton University, Kenya.
  • Google Scholar


  •  Received: 27 May 2020
  •  Accepted: 30 April 2021
  •  Published: 31 December 2021

References

Abdul Azam FA, Rajendran RNR, Yuhana NY, Mohd RNA, Ahmad S, Sulong AB (2020). Fabrication of Porous Recycled HDPE Biocomposites Foam: Effect of Rice Husk Filler Contents and Surface Treatments on the Mechanical Properties. Polymers 12(2):475.
Crossref

 

Adhikary KB, Pang S, Staiger MP (2008). Dimensional stability and mechanical behaviour of wood-plastic composites based on recycled and virgin high-density polyethylene (HDPE). Composites Part B: Engineering 39(5):807-815.
Crossref

 
 

Ayswarya EP, Francis KV, Renju VS, Thachil ET (2012). Rice Husk Ash-A Valuable Reinforcement for High Density Polyethylene. Materials and Design 41:1-7.
Crossref

 
 

Chandrasekhar SATHY, Satyanarayana KG, Pramada PN, Raghavan P, Gupta TN (2003). Review processing, properties and applications of reactive silica from rice husk-an overview. Journal of Materials Science 38(15):3159-3168.
Crossref

 
 

Chuai C, Almdal K, Poulsen L, Plackett D (2001). Conifer fibers as reinforcing materials for polypropylene?based composites. Journal of Applied Polymer Science 80(14):2833-2841.
Crossref

 
 

Collazo-Bigliardi S, Ortega-Toro R, Chiralt A (2019). Improving properties of thermoplastic starch films by incorporating active extracts and cellulose fibres isolated from rice or coffee husk. Food Packaging and Shelf Life 22:100383.
Crossref

 
 

Daramola OO, Oladele IO, Adewuyi BO, Sadiku R, Agwuncha SC (2015). Influence of Submicron Agro Waste Silica Particles and Vinyl Acetate on Mechanical Properties of High Density Polyethylene Matrix Composites. West Indian Journal of Engineering 38(1).

 
 

Dashtizadeh Z, Abdan K, Jawaid M, Khan MA, Behmanesh M, Dashtizadeh M, Ishak M (2017). Mechanical and thermal properties of natural fibre based hybrid composites: a review. Pertanika Journal of Science and Technology 25(4):1103-1122.

 
 

Della VP, Kühn I, Hotza D (2002). Rice husk ash as an alternate source for active silica production. Materials Letters 57(4):818-821.
Crossref

 
 

Deshmukh P, Peshwe D, Pathak S (2012). FTIR and TGA analysis in relation with the% crystallinity of the SiO2 obtained by burning rice husk at various temperatures. Advanced Materials Research 585:77-81. Trans Tech Publications Ltd.
Crossref

 
 

Diraddo RW, Laroche I (1995). Physical properties of virgin HDPE and recycled polymers. Plastics, Plastics, Rubber and Composites Processing and Applications 4(24):197-200.

 
 

Dominic CDM, Begum PMS, Joseph R, Jose AR (2014). Rice Husk Silica-Efficient Bio Filler in High Density Polyethylene. International Journal of Advanced Scientific and Technical Research 4(2):561-569.

 
 

Farooque KN, Zaman M, Halim E, Islam S, Hossain M, Mollah Y A, Mahmood AJ (2009). Characterization and utilization of rice husk ash (RHA) from rice mill of Bangladesh. Bangladesh Journal of Scientific and Industrial Research 44(2):157-162.
Crossref

 
 

Ghasemi Z, Younesi H (2011). Preparation and Characterization of Nanozeolite NaA from Rice Husk at Room Temperature without Organic Additives. Journal of Nanomaterials P 50.
Crossref

 
 

Ginting EM, Bukit N, Frida E (2017). Preparation and Characterization Of Nano Composites Hdpe Blend with Rice Husk Ash Nanoparticles. International Journal of ChemTech Research 10(13):348-356.

 
 

Ginting EM, Wirjosentono B, Bukit N, Agusnar H (2014). Preparation and Characterization of Rice Husk Ash as Filler Material into Nanoparticles on HDPE Thermoplastic Composites. Journal Chemistry and Materials Research 6(7).

 
 

Govindarao VMH (1980). Utilization of rice husk: a preliminary analysis. Journal of Scientific and Industrial Research 39(9):495-515

 
 

Johar N, Ahmad I, Dufresne A (2012). Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk. Industrial Crops and Products 37(1):93-99.
Crossref

 
 

Hadi JA, Najmuldeen FG, Ahmed I (2014). Quality restoration of waste polyolefin plastic material through the dissolution-reprecipitation technique. Chemical Industry and Chemical Engineering Quarterly 20(2):163-170.
Crossref

 
 

Hahladakis JN, Velis CA, Weber R, Iacovidou E, Purnell P (2018). An overview of chemical additives presents in plastics: migration, release, fate and environmental impact during their use, disposal and recycling. Journal of hazardous materials 344:179-199.
Crossref

 
 

Khalil HA, Ismail H, Rozman HD, Ahmad MN (2001). The effect of acetylation on interfacial shear strength between plant fibres and various matrices. European Polymer Journal 37(5):1037-1045.
Crossref

 
 

Khan JH, Ahmed N (2003). Photo-oxidative degradation of recycled, reprocessed HDPE: changes in chemical, thermal and mechanical properties. Bulgarian Journal of Physics 30(3-4):158-169.

 
 

Kohl JG, Kohl AG, Licea-Claverie A, Zizumbo-Lopez A, Jayasinghe R, Ashokcline M, Baillie C (2020). Mechanical and thermal characterization of as-received recycled polyethylene filled with rice husk and their relationship to the end use of these composites. Polymer-Plastics Technology and Materials 59(13):1463-1472.
Crossref

 
 

Lei Y, Wu Q, Yao F, Xu Y (2007). Preparation and properties of recycled HDPE/natural fiber composites. Composites Part A: applied science and manufacturing 38(7):1664-1674.
Crossref

 
 

Li Y, Hu C, Yu Y (2008). Interfacial studies of sisal fiber reinforced high density polyethylene (HDPE) composites. Composites Part A: Applied Science and Manufacturing 39(4):570-578.
Crossref

 
 

Lin JH, Pan YJ, Liu CF, Huang CL, Hsieh CT, Chen CK, Lou CW (2015). Preparation and Compatibility Evaluation of Polypropylene/ High Density Polyethylene Polyblends. Materials 8(12):8850-8859.
Crossref

 
 

Mohamad FZC (2007). Performance of Recycled High Density Polyethylene (HDPE)/Rice Husk Composite Injection Grade in Thermoforming Process.

 
 

Montanheiro TLDA, Passador FR, Oliveira MPD, Durán N, Lemes AP (2016). Preparation and Characterization of Maleic Anhydride Grafted Poly (Hydroxybutirate-CO-Hydroxyvalerate)-PHBV-g-MA. Materials Research 19(1):229-235.
Crossref

 
 

Ng WK, Johar M, Israr HA, Wong KJ (2020). A review on the interfacial characteristics of natural fibre reinforced polymer composites. Interfaces in Particle and Fibre Reinforced Composites pp. 163-198.
Crossref

 
 

Parvinzadeh M, Moradian S, Rashidi A, Yazdanshenas ME (2010). Surface characterization of polyethylene terephthalate/silica nanocomposites. Applied Surface Science 256(9):2792-2802.
Crossref

 
 

Pongdong W, Nakason C, Kummerlöwe C, Vennemann N (2015). Influence of filler from a renewable resource and silane coupling agent on the properties of epoxidized natural rubber vulcanizates. Journal of Chemistry 2015.
Crossref

 
 

Prachayawarakorn J, Yaembunying N (2005). Effect of recycling on properties of rice husk-filled-polypropylene. Journal of Science and Technology 27(2):343-352.

 
 

Ren Y, Abbood HA, He F, Peng H, Huang K (2013). Magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent: preparation, characterization, and application in heavy metal adsorption. Chemical Engineering Journal 226:300-311.
Crossref

 
 

Salleh FM, Hassan A, Yahya R, Azzahari AD (2014). Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites. Composites Part B: Engineering 58:259-266.
Crossref

 
 

Sarasini F, Fiore V (2018). A systematic literature review on less common natural fibres and their biocomposites. Journal of Cleaner Production 195:240-267.
Crossref

 
 

Shivam S, Arun N, Kirti S (2019). A Study on Potential Use of Rice Husk in India. Electrophysical Processing Methods in Modern Industry pp. 77-81.

 
 

Singh B (2018). Rice husk ash. In Waste and Supplementary Cementitious Materials in Concrete. Woodhead Publishing pp. 417-460.
Crossref

 
 

Tong JY, Royan NRR, Ng YC, Ghani A, Hafizuddin M, Ahmad S (2014). Study of the mechanical and morphology properties of recycled HDPE composite using rice husk filler. Advances in Materials Science and Engineering 2014.
Crossref

 
 

Van TT, Thao NTP, Hieu TT, Braunegg S, Schnitzer H, Braunegg G, Le S (2020). An integrated eco-system for pollution prevention and greening the production chain of small-scale rice-paper production-A case study from Vietnam. Journal of Cleaner Production 245:118785.
Crossref

 
 

Yemele MCN, Koubaa A, Cloutier A, Soulounganga P, Wolcott M (2010). Effect of bark fiber content and size on the mechanical properties of bark/HDPE composites. Composites Part A: Applied Science and Manufacturing 41(1):131-137.
Crossref

 
 

Zaaba NF, Ismail H (2019). Thermoplastic/Natural Filler Composites: A Short Review. Journal of Physical Science 30 p.
Crossref

 
 

Zebarjad SM, Sajjadi SA, Tahani M, Lazzeri A (2006). A study on thermal behaviour of HDPE/CaCO3 nanocomposites. Journal of Achievements in Materials and Manufacturing Engineering 17(1-2):173-176.

 
 

Zhang XM, Elkoun S, Ajji A, Huneault MA (2004). Oriented structure and anisotropy properties of polymer blown films: HDPE, LLDPE and LDPE. Polymer 45(1):217-229.
Crossref

 
 

Zhang Y, Xu Q, Zhang S, Liu J, Zhou J, Xu H, Li J (2013). Preparation of thiol-modified [email protected] SiO2 nanoparticles and their application for gold recovery from dilute solution. Separation and Purification Technology 116:391-397.
Crossref