Journal of
Mechanical Engineering Research

  • Abbreviation: J. Mech. Eng. Res.
  • Language: English
  • ISSN: 2141-2383
  • DOI: 10.5897/JMER
  • Start Year: 2009
  • Published Articles: 118

Full Length Research Paper

Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings

Bing Han
  • Bing Han
  • School of Mechanical and Mining Engineering, The University of Queensland, Australia
  • Google Scholar
Martin Veidt
  • Martin Veidt
  • School of Mechanical and Mining Engineering, The University of Queensland, Australia
  • Google Scholar
Johannes Reiner
  • Johannes Reiner
  • School of Mechanical and Mining Engineering, The University of Queensland, Australia
  • Google Scholar
Matthew Dargusch
  • Matthew Dargusch
  • School of Mechanical and Mining Engineering, The University of Queensland, Australia
  • Google Scholar


  •  Received: 02 September 2015
  •  Accepted: 17 March 2016
  •  Published: 30 April 2016

References

Ashby M (2012). CES Edu Pack software, Granta Design Limited, Cambridge, UK.

 

Ayyar A, Crawford GA, Williams JJ, Chawla N (2008). Numerical simulation of the effect of particle spatial distribution and strength on tensile behaviour of particle reinforced composites. Comput. Mater. Sci. 44(2):496-506.
Crossref

 
 

Borst R, Gutierrez MA, Wells GN, Remmers JJC, Askes H (2004). Cohesive-zone models, higher-order continuum theories and reliability methods for computational failure analysis. Int. J. Numer. Methods Eng. 60(1):289-315.
Crossref

 
 

Chai H, Chiang MY (1996). A crack propagation criterion based on local shear strain in adhesive bonds subjected to shear. J. Mech. Phys. Solids 44(10):1669-1689.
Crossref

 
 

Chawla N, Andres C, Jones JW, Allison JE (1998). Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiC p composite. Metallurgical Mater. Trans. A 29(11):2843-2854.
Crossref

 
 

Chawla N, Shen YL (2001). Mechanical behavior of particle reinforced metal matrix composites. Adv. Eng. Mater. 3(6):357-370.
Crossref

 
 

De Rosis A, Falcucci G, Ubertini S, Ubertini F (2014). Aeroelastic study of flexible flapping wings by a coupled lattice Boltzmann-finite element approach with immersed boundary method. J. Fluids Struct. 49:516-533.
Crossref

 
 

Dugdale D (1960). Yielding of steel sheets containing slits. J. Mech. Phys. Solids 8(2):100-104.
Crossref

 
 

Fang X, Yang QD, Cox BN, Zhou ZQ (2011). An augmented cohesive zone element for arbitrary crack coalescence and bifurcation in heterogeneous materials. Int. J. Numer. Methods Eng. 88(9):841-861.
Crossref

 
 

Geubelle PH, Baylor JS (1998). Impact-induced delamination of composites: a 2D simulation. Composites Part B: Engineering 29(5):589-602.
Crossref

 
 

Han B (2014). Finite Element Simulation of Crack Propagation in Aircraft Coatings. PhD thesis, University of Queensland.

 
 

Han B, Veidt M (2012). Finite element simulation of crack propagation in military aircraft coatings. In 28th International Congress of the Aeronautical Sciences (ICAS 2012).

 
 

Hansbo A, Hansbo P (2004). A finite element method for the simulation of strong and weak discontinuities in solid mechanics. Comput. Methods Appl. Mech. Eng. 193(33):3523-3540.
Crossref

 
 

Hegedus C, Pulley D, Spadafora S (1989). Organic coatings first line of defense. Adv. Mater. Process pp. 62-64.

 
 

Hill R (1963). Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids 11(5):357-372.
Crossref

 
 

Jaya A, Tiong U, Clark G (2012). The interaction between corrosion management and structural integrity of aging aircraft. Fatigue & Fracture of Eng. Mater. Struct. 35(1):64-73.
Crossref

 
 

Ling D, Yang QD, Cox BN (2009). An augmented finite element method for modeling arbitrary discontinuities in composite materials. Int. J. Fract. 156(1):53-73.
Crossref

 
 

Llorca J, Gonzalez C, Molina-Aldareguia JM, Munoz R, Canal LP (2011). Multiscale modeling of composite materials: a roadmap towards virtual testing. Adv. Mater. 23(44):5130-5147.
Crossref

 
 

Maiti S, Smith R (1983). Comparison of the criteria for mixed mode brittle fracture based on the preinstability stress-strain field Part I: Slit and elliptical cracks under uniaxial tensile loading. Int. J. Fract. 23(4):281-295.
Crossref

 
 

Mergheim J, Kuhl E, Steinmann P (2005). A finite element method for the computational modelling of cohesive cracks. Int. J. Numer. Methods Eng. 63(2):276-289.
Crossref

 
 

Moës N, Dolbow J, Belytschko T (1999). A finite element method for crack growth without remeshing. Int. J. Numer. Method Eng. 46(1):131-150.
Crossref

 
 

Mortensen A, Llorca J (2010). Metal matrix composites. Annu. Rev. Mater. Res. 40:243-270.
Crossref

 
 

Sakamoto H, Doi H, Kobayashi E, Suzuki Y, Hanawa T (2007). Structure and strength at the bonding interface of a titanium-segmented polyurethane composite through 3-(trimethoxysilyl) propyl methacrylate for artificial organs. J. Biomed. Mater. Res. Part A 82(1):52-61.
Crossref

 
 

Simms J (1987). Acceleration shift factor and its use in evaluating weathering data. J. Coat. Technol. Res. 59(748):45-53.

 
 

Skaja A, Fernando D, Croll S (2006). Mechanical property changes and degradation during accelerated weathering of polyester-urethane coatings. J. Coat. Technol. Res. 3(1):41-51.
Crossref

 
 

Strawbridge A, Evans HE (1995). Mechanical failure of thin brittle coatings. Eng. Fail. Anal. 2(2):85-103.
Crossref

 
 

Tiong U, Clark G (2010). Critical strain performance of coating systems at aircraft joints. In: 27th International Congress of the Aeronautical Sciences, Nice, France.

 
 

Trueman A, Knight S, Colwell J, Skeldon P, Thompson G (2013). 3-D tomography by automated in situ block face ultramicrotome imaging using an FEG-SEM to study complex corrosion protective paint coatings. Corros. Sci. 75:376-385.
Crossref

 
 

Tvergaard V, Hutchinson JW (1992). The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J. Mech. Phys. Solids 40(6):1377-1397.
Crossref

 
 

Wang JT (2010). Relating Cohesive Zone Model to Linear Elastic Fracture Mechanics, National Aeronautics and Space Administration, Langley Research Center.

 
 

Wells GN (2001). Discontinuous modelling of strain localisation and failure, Delft University of Technology.

 
 

Wicks Jr ZW, JOnes FN, Pappas SP, Wicks DA (2007). Organic coatings: science and technology, John Wiley \& Sons.

 
 

Xie D, Salvi AG, Sun C, Waas AM, Caliskan A (2006). Discrete cohesive zone model to simulate static fracture in 2D triaxially braided carbon fiber composites. J. Compos. Mater. 40(22):2025-2046.
Crossref

 
 

Yang QD, Cox BN, Fang XJ, Zhou ZQ (2011). Virtual testing for advanced aerospace composites: advances and future needs. J. Eng. Mater. Technol. 133(1).
Crossref

 
 

Yeo LP Jam YC, Chan-Park MB, Joshi SC, Hardt DE (2005). Demolding of high aspect ratio polymeric micro-patterning. Int. J. Nanosci. 4(04):543-549.
Crossref

 
 

Zhou Z (2010). Multiple-scale numerical analysis of composites based on augmented finite element method.