Full Length Research Paper
References
Geilikman MB, Dusseault MB, Dullien F. A (1994). Fluid production enhancement by exploiting sand production. SPE 27820, Proc. SPE/DOE 9th a Symposium on Improved Oil Recovery, Tulsa, OK. |
|
Ghalambor A, Hayatdavoudi A, Alcocer CF, Koliba RJ (1989). Predicting Sand Production in U.S. Gulf Coast Gas Wells Producing Free Water. J. Pet. Technol. 41(12):1-336. |
|
Isehunwa SO, Falade GK (2007). Improved Characterization of Heptane-plus Fractions of Light-Crude Oils. SPE paper 111918 presented at the 31st Annual Technical Confertence and Exhibition, Abuja. |
|
Isehunwa SO, Olanrewaju O (2010). A Simple Analytical Model for Predicting Sand Production in a Niger Delta Oil Field. Int. J. Eng. Sci. Technol. 2(9):4379-4387. |
|
Lantz JR, Ali N (1991). Development of a mature giant offshore oil field. J. Pet. Technol. 43(04):392-454. |
|
McPhee CA, Enzendorfer CK (2004). Sand Management Solutions for High-Rate Gas Wells, Sawan Field, Pakistan, SPE 86535. In: proceedings of SPE Int. Symp. Exh. on Formation Damage, Lafayette, Louisiana, USA 18-20 February. |
|
Morita N, Whitfill DL, Massie I, Knudsen TW (1987a). Realistic study of sand production prediction – numerical approach. SPE 16989. In Proc. of the 1987 Ann. Tech. Conf. & Exhib. Dallas, Sept. 27-30. |
|
Morita N, Whitfill DL, Fedde OP, Løvik TH (1987b). Realistic Sand Production Prediction: Analytical Approach. Paper SPE 16990, 62nd Annual Technical Conference and Exhibition of the Society of Petroleum Engineers Proc., Dallas, Texas. |
|
Morita N, Withfill DL, Fedde OP, Levik TH (1989). Parametric Study of Sand Production Prediction: Analytical Approach. Soc. Pet. Eng. J. Prod. Eng. 4(01):25-33. |
|
Papamichos E, Malmanger EM (1999). A Sand Erosion Model for Volumetric Sand Predictions in a North Sea Reservoir. paper Soc. Pet. Eng. J. 54007. |
|
Penberthy WL, Shaughnessy CM (1992). Sand Control. Soc. Pet. Eng. J. Series on Special Topics, Volume 1. |
|
Risnes R, Bratli RK, Horsrud P (1982). Sand stresses around a wellbore. Soc. Pet. Eng. J. 22(06):883-898. |
|
Salama MM (1998). Sand Production Management; OTC 8900, Houston, 4-7. |
|
Tronvoll J, Fjaer E (1994). Experimental study of sand production from perforation cavities. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 31:393-410. |
|
Tronvoll J, Halleck P (1994). The effect of perforation damage on sand production in a weak sandstone. SPE/ISRM 28071, in Proc. EUROCK '94, Delft, NL, 29-31. |
|
Vardoulakis I (2006). Sand Production and Sand Internal Erosion: Continuum Modeling." Alert school: Geomechanical and Structural Issues in Energy Production. Veeken CAM, Davies DR, Kenter CJ, Kooijman AP (1991). Sand production prediction review, Developing an intergrated approach". SPE 22792. In Proc. of the 66th Annual Technical Conference and Exhibition, Oct. 6-9. |
|
Vaziri H, Xiao Y, Palmer I (2002). Assessment of several sand prediction models with particular reference to HPHT wells". SPE/ISRM 78235, Irvine. |
|
Weingarten JS, Perkins TK (1992). Prediction of sand Production in Gas wells: Methods and Gulf of Mexico case Studies": SPE Paper 24797 presented at the 67th Annual Technical Conference and Exhibition, Washington, D.C. |
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0