Journal of
Petroleum and Gas Engineering

  • Abbreviation: J. Petroleum Gas Eng.
  • Language: English
  • ISSN: 2141-2677
  • DOI: 10.5897/JPGE
  • Start Year: 2010
  • Published Articles: 108

Full Length Research Paper

Software approach on crude oil yields prediction: A case study of Tema Oil Refinery

Solomon Adjei Marfo
  • Solomon Adjei Marfo
  • Department of Petroleum Engineering, Faculty of Mineral Resources Technology, University of Mines and Technology, Tarkwa, Ghana.
  • Google Scholar
Prince Opoku Appau
  • Prince Opoku Appau
  • Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, P. R. China.
  • Google Scholar
Daniel Tettegah
  • Daniel Tettegah
  • Environmental Protection Agency, Tarkwa, Ghana.
  • Google Scholar


  •  Received: 29 March 2019
  •  Accepted: 26 June 2019
  •  Published: 31 October 2019

References

Al-Enezi G, Elkamel A (2000). Predicting the Effect of Feedstock on Product Yields and Properties of the FCC Process. Petroleum Science and Technology 18(3-4):407-428.
Crossref

 

Al-Qahtani KY, Elkamel A (2010). Planning and Integration of Refinery and Petrochemical Operations. 1st ed. Wiley‐VCH Verlag GmbH & Co. KGaA, Germany.
Crossref

 

Ali BF, Rashid SJ (2013). Establishing a crude oil refinery in Koya. First International Symposium on Urban Development: Koya as a Case Study. WIT Press, UK.
Crossref

 

Ancheyta-Juarez J, Murillo-Hernandez JA (2000). A Simple Method for Estimating Gasoline, Gas, and Coke Yields in FCC Processes. Energy and Fuels 14(2):373-379.
Crossref

 

Anon (2017). Aviation Turbine Kerosene Production in Ghana. 

 

Anon (2018). Tema Oil Refinery (TOR), 

 

Castiglioni BP (1983). How to Predict Coke Yield. Hydrocarbon Processing 62(2):35-38.

 

Fahim MA, Al-Sahhaf TA, Elkilani A (2009). Fundamentals of Petroleum Refining. Elsevier Pub, UK.

 

Farag IH, Tsai KY (1987). Simulation of Fluid Catalytic Cracking Operation, Mathematical Modelling 8:311-316.
Crossref

 

Fahim MA, Al-Sahhaf TA, Elkilani A (2009). Fundamentals of Petroleum Refining. Elsevier Pub, UK.

 

Fisher IP (1990). Effect of Feedstock Variability on Catalytic Cracking Yields. Applied Catalysis 65(2):189-210.
Crossref

 

Gary JH, Handwerk GE (1978). Petroleum Refining, Technology and Economics. Marcel Dekker, New York, United States.

 

Gary JH, Handwerk GE, Kaiser MJ (2007). Petroleum Refining: Technology and Economics. 5th ed. CRC Press, United States.

 

Haghi RK, Torrens F (2018). Engineering Technology and Industrial Chemistry with Applications: Innovations in Physical Chemistry. CRC Press, United States.
Crossref

 

Jones DS, Pujadó PP (2006). Handbook of Petroleum Processing. Springer Science & Business Media, Germany.
Crossref

 

Maples RE (2000). Petroleum Refinery Process Economics. 2nd ed. PennWell Corporation, Tulsa, Oklahoma, United States.

 

Marfo SA, Opoku Appau P, Kpami, LAA (2018). Subsea Pipeline Design for Natural Gas Transportation: A Case Study of Côte D'ivoire's Gazelle Field, International Journal of Petroleum and Petrochemical Engineering 4(3):21-34.

 

MathPro (2011). An Introduction to Petroleum Refining and the Production of Ultra Low Sulfur Gasoline and Diesel Fuel. Report prepared for The International Council on Clean Energy, October 24, 2011.

 

Michael G, Al-Rabiah H, Mirza Y, Bouresli R, Kadhmi R, Al-Mutawa A (2009). Development of Mathematical Correlations for the Calculation of Boiling Range of Petroleum Products Equivalent to ASTM Physical Distillation Methods from Simulated Distillation Methods. Instrumentation Science and Technology 38(1):1-30.
Crossref

 

Morsali S (2017). Damage Assessment of Bitumen Refineries Using Simapro (LCA) Inventory Data. Journal of Petroleum and Environmental Biotechnology 8(1):317.
Crossref

 

Parkash S (2003). Refining Processes Handbook, Elsevier Publishers, Oxford, United Kingdom.
Crossref

 

Perumal AA (2014). Characterisation of Biodiesel from Litsea Glutinosa. MSc Thesis. University of Technology, Durban, South Africa.

 

Pitault I, Nevicato D, Forissier M, Bernard JR (1994). Kinetic Model based on a Molecular Description for Catalytic Cracking of Vacuum Gas Oil. Chemical Engineering Science 49(24):4249-4262.
Crossref

 

Stratiev D, Minkov D (2000). Prediction of FCC Yields from Feedstock Quality Characterised by Empirical Methods. Oil Gas European Magazine 26(1):27-32.

 

Stratiev DS, Shishkova IK, Dobrev DS (2012). Fluid Catalytic Cracking Feed Hydrotreatment and its Severity Impact on Product Yields and Quality. Fuel Processing Technology 94(1):16-25.
Crossref

 

Xu C, Gao J, Zhao S, Lin S (2005). Correlation between Feedstock SARA Components and FCC Product Yields. Fuel 84(6):669-674.
Crossref