Full Length Research Paper
References
Ajay M (2012). Modified analytical model for prediction of steam flood performance. Journal of Petroleum Exploration and Production Technology 2:117-123. |
|
Huang YH, Liu D, Luo YK (2013). Research on multiple thermal fluid stimulation for offshore heavy oil production. Special Oil and Gas Reservoirs 20(2):164-165. |
|
Xiong H, Huang S, Liu H (2017). A Novel model to investigate the effects of injector-producer pressure difference on SAGD for bitumen recovery. International Journal of Oil, Gas and Coal Technology 16(3):17-235. |
|
Hou J, Zhou K, Zhao H, Kang XD, Wang ST, Zhang XS (2016). Hybrid optimization technique for cyclic steam stimulation by horizontal wells in heavy oil reservoir. Computers & Chemical Engineering 84(4):363-370. |
|
Khansari Z, Kapadia P, Mahinpey N, Gates ID (2014). A new reaction model for low temperature oxidation of heavy oil: Experiments and numerical modeling. Energy 64:419-428. |
|
Li W (2016). The influence of interlayer on the development effect of the vertical and horizontal wells SAGD. Science Technology and Engineering 16(4):28-32. |
|
Liu D, Li YP, Zhang FY (2012). Reservoir applicability of steam stimulation supplemented by flue gas. China Offshore Oil and Gas 24(S1):62-66. |
|
Liu D (2015). A new model for calculating heating radius of thermal recovery horizontal wells. China Offshore Oil and Gas 27(3):84-90. |
|
Liu D, Hu TH, Pan GM (2015). Comparison of production results between multiple thermal fluid huff and puff and steam huff and puff in offshore application. Special Oil and Gas Reservoirs 22(4):118-120. |
|
Sheikholeslami M, Hayat T, Alsaedi A (2016). Numerical analysis of EHD nanofluid force convective heat transfer considering electric field dependent viscosity. International Journal of Heat and Mass Transfer. 108:2558-2565. |
|
Ma KQ, Liu D (2018). Model for capacity forecasting of thermal soaking recovery in horizontal wells in heavy oil reservoirs. Journal of Southwest Petroleum University (Science and Technology Edition) 40(1):114-121. |
|
Ma CL (2017). Classification and identification of the interlayer in block D of medium-thick viscous oil reservoirs in Liaohe Oilfield. Journal of Geology 41(2):342-346. |
|
Tang QSX (1995). Characteristics of partings and their effects on thermal recovery of heavy oil of GAO 3 area in Gaosheng oilfield. Special Oil and Gas Reservoirs 2(1):23-30. |
|
Wang GY, Yang SC, Liao FY (2009). Hierarchical structure of barrier beds and interbeds in braided river reservoirs. Natural Gas Geoscience 20(3):378-383. |
|
Wang S, Huang Y, Civan F (2006) Experimental and theoretical investigation of the Zaoyuan field heavy oil flow through porous media. Journal of Petroluem Science and Engineering 50:83-101. |
|
Wu Y, Li M, Cui Z (2011). Effect of interbeds within the thick debouch bar sand body on remaining oil distribution. Journal of Yangtze University (Natural Science Edition) 8(3):58-60. |
|
Yan YZ, Duan TX (2008). Identification and inter-well prediction of interbeds in thick oil layer. Lithologic Reservoirs 20(2):127-131. |
|
Yang Y, Huang SJ, Yang L, Song QL, Wei SL, Xiong H (2016). A multistage theoretical model to characterize the liquid level during steam-assisted-gravity-drainage process. SPE Journal 22(01):327-338. |
|
Zhou GW, Tan CQ, Zheng XW (2006). Research on recognition of barrier/interbed via logging in H Oilfield. Geophysical Prospecting for Petroleum 45(5):542-545. |
|
Zhong YL (2012). The Significance of interlayer in thermal recovery of heavy oil by steam stimulation. Journal of Shengli College China University of Petroleum 26(4):6-8. |
|
Zhong LG, Tian YC, Jiang YX (2015). Low temperature oxidation reaction of super heavy oil in block Du 84 of Liaohe Oilfield. Journal of Northeast Petroleum University 39(2):116-122. |
|
Zhu J, Li CX, Xin PG (2011). Analysis of viscosity-temperature characteristics and rheology behavior for heavy oil. Journal of Petrochemical Universities 24(2):66-68. |
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0