Journal of
Toxicology and Environmental Health Sciences

  • Abbreviation: J. Toxicol. Environ. Health Sci.
  • Language: English
  • ISSN: 2006-9820
  • DOI: 10.5897/JTEHS
  • Start Year: 2009
  • Published Articles: 210

Full Length Research Paper

Development of urea formaldehyde and polystyrene waste as copolymer binder for emulsion paint formulation

Osemeahon S. A
  • Osemeahon S. A
  • Department of Chemistry, Modibbo Adama University of Technology, Yola, Adamawa State, Nigeria
  • Google Scholar
Dimas B. J.*
  • Dimas B. J.*
  • Department of Chemistry, Modibbo Adama University of Technology, Yola, Adamawa State, Nigeria
  • Google Scholar


  •  Received: 08 October 2013
  •  Accepted: 02 February 2014
  •  Published: 31 March 2014

References

Abdullah ZA, Park BD (2010). Influence of acrylamide copolymerization of urea-formaldehyde resin adhesives to their chemical structure and performance. J. Appl. Polym. Sci. 117(6):3181-3186.

View

 
Afsoon F, Laleh R, Faramarz A (2011). DSC analysis of thermosetting polyimide based on three bismaleimide resin eutectic mixtures. Iranian Polym. J. 20(2):161-171.
 
Afzal A, Siddiqi HM, Saeed S, Ahmad Z (2013). Exploring resin viscosity effects in solventless processing of nano-SiO2/epoxy polymer hybrids. RSC Adv. 3:3885-3892.
Crossref
 

Ahmed H, Bahaa H, Majeed A, Nahida A, Athraa S (2012). Synthesis and study electrical properties of (PS-CAO) composite. Am. J. Sci. Res. 75:5-8.

View

 

Akpabio UD (2010). Retention of urea formaldehyde resin finish on cellulosic fabric and its effect on water absorbent capacity of the treated fabric. Int. J. Adv. Sci. Tech. Res. 2(5):31-39.

View

 
Al-Manasir N (2009). Preparation and characterization of crosslinked polymeric nanoparticles for enhanced oil recovery applications. University of Oslo, Norway. pp. 12-85.
 

Atiq N, Ahmed S, Ali MI, Andleeb S, Ahmed B, Roson G (2010). Isolation and identification of polystyrene biodegrading bacteria from soil. Afr. J. Microbiol. Res. 4(14):1537-1541.

View

 
Salari A, Tabarasa T, Abolghasem Khazaeian A, Saraeian A (2013). Improving some applied properties of oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunie) wood employing nano-SiO2. Ind. Crops Prod. 42:1-9.
 
Bharath NK, Swamy PR (2009). Adhesive tensile and moisture absorption characteristics of natural fibers' reinforced urea formaldehyde composites. Int. J. Recent Trends n Engine. 1(5):60-62.
 
Bhattacharya A, James W, Rawlins PR (2009). Poly grafting and cross linking. John Wiley & Sons, Inc., Hoboken, New Jersey. pp. 276-281.
 
Blaise VI, Ogunniya DS, Ongoka PR, Moussounga JE, Ouamba JM (2012). Physio-Chemical properties of alkyd resin and palm oil. Malaysian Polymer J. 7(2):42-45.
 

Cakir M, Kartal I, Demirer H, Samur R (2012). Effect of water absorption on the wear behaviour of sol-gel processed epoxy/silica hybrids. Sci. Res. Essays 7(7):805-812.

View

 
Derkyi NS, Darkwa NA,Yartey JG (2008). Effect of cassava flour as urea formaldehyde adhesive extender on the bonding strength of plywood. Ghana J. For. 23(24):25-34
 
Desai DS, Patel VJ, Sinha KV (2003). Polyurethane adhesive system from biomaterial-based polyol for bonding wood. Int. J. Adh. Adhes. 3(5):393-399.
Crossref
 
Dumitru P, Jitaru I (2011). Improving the Performance of Exterior Emulsion Paint by the Variation of the Chemical Nature of Polymer Latex. Mater. Plastice 48(1):64-70.
 
Emile G (2003). Moisture transfer properties of coated gypsum. Eindhoven University Press, Eindhoven, Netherlands. pp. 2-6.
 

Gonzalez GM, Cabanelas JC, Baselga J (2012). Application of FTIR on epoxy resins-Identification, monitoring the curing process, phase separation and water uptake. Infrared Spectrosc. – Mater. Sci. Eng. Technol. 261-283.

View

 

Habibu U (2011). Production of trowel paints using polyvinyl synthesis from vinyl acetate monomer as binder. Leonardo J. Sci.19:49-56.

View

 
Hemant K, Tripathi S, Mistry S, Bajpai G (2009). Synthesis, characterization and application of coatings based on epoxy novalac and liquid rubber blend. E-J. Chem. 6(4):1253-1259.
 

Hlaing NN, Oo MM (2008). Manufacture of alkyd resin from castor oil. World Acad. Sci. Eng. Tech. 24(208):155-161.

View

 
Hussain AI, Nasr HE (2010). The role of carboxylic acid on the characterization and evaluation seed emulsion of styrene/butyl acrylate copolymers lattices as paint. Nature Sci. 8(8):94-103.
 
Hwang Y, Sangmook L, Youngjae Y, Kwangho J, Lee W (2012). Reactive extrusion of polypropylene/polystyrene blends with Supercritical carbon dioxide. Macromol. Res. 20(6):559-567.
Crossref
 
Isiya AD (2012). Waste Management: (A look into Biodegradable and non Biodegradable Materials). Proc. Int. Conf. Sci. Sustain. Dev. 4(3):35-40.
 
Jain VV (2008). Evaluation of second generation indirect composite resins. A thesis Submitted to the Faculty of the University Graduate School in partial fulfillment of the requirements for the degree, Master of Science in the Department of Dental Materials, Indiana University, Indianapolis. pp. 1-94.
 
Jesmy J, Jyotishkumar P, Sajeev MG, Sabu T (2011). Recycling of polymer blends. Recent Dev. Polym. Recycling 2011:187-214.
 

Kaniappan K, Latha S (2011). Certain Investigations on the formulation and characterization of polystyrene/poly(methylmethacrylate) blends. Int. J. Chem. Res. 3(2):708-717.

View 

 

Kaygin B, Akgun E (2009). A nano-technological product: An innovative varnish type for wooden surfaces. Sci. Res. Essay 4(1):001-007.

View

 
Kazys R, Rekuviene R (2011). Viscosity and density measurement methods for polymer melts. Ultragarsas "Ultrasound" 66(4):20-25.
 

Lee J, Jeon J, Kim S (2011). Green adhesives using tannin and cashew nut shell liquid for environmental –friendly furniture materials. J. Korean Furniture Soc. 22(3):219-229.

View

 
Lin KF (2005). Paints, Varnishes and related products. In: Shahidi F, Bailey's Industrial Oil and Fat Products, Sixth Edition. John Wiley & Sons, Inc.
 

Magizvo RV (2011). The incidence of plastic waste and their effect in Alice, SA. Online J. Soc. Sci. Res. 1(2):49-53.

View

 
Mavani IS, Mehta MN, Parsania HP (2007). Synthesis and physico-chemical study of polyester resin of 1,1- bis(3- methyl-4-hydroxy phenyl)cyclohexane and rininoleic acid and its polyurethanes with polyethylene glycol. J. Sci. Ind. Res. 66:377-384.
 
Menkiti MC, Onukwuli OD, (2011). Utilization potentials of rubber seed oil for the production of alkyd resin using variable base oil lengths. New York Sci. J. 4 (2):51-59.
 
Naghash JH, Karimzadeh A, Momeni RA, Massah RA, Alian H (2007). Preparation and properties of triethoxyvinylsilane-modified styrene- butyl acrylate emulsion coploymers. Turk. J. Chem. 31(2007):257-269.
 
Nouailhas H, Guerneve C, Caillol S, Boutevin B, Fulcrand H (2011). Synthesis and properties of biobased resin, Part 1. Glycidation of flavonoids by epichlorohydrin. J. Polym. Sci. Part A: Polym. Chem., 49 (2011): 2261-2270.
Crossref
 
Oluranti SA, Emmauel RS, Adesola TA, Olusesan FB (2011). Rheological properties of polymers: structure and morphology of molten polymer blends. Mater. Sci. Appl. 2:30-41
 

Osemeahon SA, Archibong CA (2011). Development of urea formaldehyde and polyethylene waste as a copolymer binder for emulsion paint formulation. J. Toxicol. Environ. Health Sci. 3(4):101-108.

View

 

Osemeahon SA (2011). Copolymerization of methylol urea with ethylol urea resin for emulsion paint formulation. Afr. J. Pure Appl. Chem. 5(7):204-211.

View

 

Osemeahon SA, Nkafamiya II, Fai FY (2009). Application of methylol urea/natural rubber copolymer composite for emulsion paint formulation. Int. J. Biol. Chem. Sci. 3(6):1491-1498.

View

 

Park BD, Jeong HW, Lee SM (2010). Morphology and chemical elements detection of cured urea formaldehyde resins. J. Appl. Polym. Sci. 120(3):1475-1482.

View

 
Ricky G, Oscar L, Yusef S (2010). An Investigation into Polystyrene Recycling at UBC. Dawn Mills APSC 262. The University of British Columbia. pp. 1-18.
 
Salthammer T, Mentese S, Marutzky R (2010). Formaldehyde in the indoor environment. Chem. Rev. 110(4):2536-2572.
Crossref
 
Saravanan D, Gomathi T, Sudha PN (2011). Synthesis, characterization and thermal behaviour of natural polymer blend. Int. J. Chem. Analyt. Sci. 2(12):1265-1269.
 

Shinde N, Kathalewar M, Sabnis A (2012). Synthesis and characterization of emulsion polymers using isopropenyl acetate. Int. J. Ind. Chem. 3(28):3-8.

View

 
Stabik J, Dybowska A, Szczepanik M, Sucho L (2009). Viscosity measurements of epoxy resin filled with ferrite powders. Arch. Mater. Sci. Eng. 3(1):34-40.
 
Suurpere A, Christjanson P, Siimer K (2006). Rotational Viscometry for the study of urea formaldehyde resins. Proc. Estonian Acad. Sci. Eng. 12(2):134-146.
 
Thormann E, Simonsen AC, Hansen PL, Mouritsen OG (2006). Interaction between polystyrene particles and hydrophilic surfaces in aqueous solutions. Langmuir 24:7278-7284.
Crossref
 
Toloei A, Atashin S, Bahrololoom ME (2013). A new approach in modifying polymeric coating to increase corrosion resistance properties. ISRN Materials Sci. 2013:1-7.
Crossref
 

Arthanareeswana G, Velu S, Muruganandam L (2011). Performance enhancement of polysulfone ultrafiltration membrane by blending with polyurethane hydrophilic polymer. Int. J. Chem. Anal. Sci. 2:787-92.

View

 
Yumiko H, Takanobu S, Tetsuo O, Toshiaki O, Masashi M, John M (2010). Effects of specular component and polishing on color resin composites. J. Oral Sci. 52(4):599-607
Crossref
 
Zorba T, Papadopoulou E, Hatjiissaak A, Paraskevopoulos KM, Chrissafis K (2008). Urea-formaldehyde resins characterized by thermal analysis and FTIR method. J. Thermal Anal. Calorim. 92:29-33.
Crossref