Scientific Research and Essays

  • Abbreviation: Sci. Res. Essays
  • Language: English
  • ISSN: 1992-2248
  • DOI: 10.5897/SRE
  • Start Year: 2006
  • Published Articles: 2758

Full Length Research Paper

Development of a device adapted to perform the torch gas tungsten arc welding (GTAW) hardfacing using alloys in powder form

Paulo Cezar Moselli
  • Paulo Cezar Moselli
  • Department of Mechanical and Materials Engineering, University Federal Thecnological of Paraná, Brazil.
  • Google Scholar
Marcelo Falcão de Oliveira
  • Marcelo Falcão de Oliveira
  • Department of Mechanical and Materials Engineering, University Federal Thecnological of Paraná, Brazil.
  • Google Scholar
João Roberto Sartori Moreno
  • João Roberto Sartori Moreno
  • Department of Mechanical and Materials Engineering, University Federal Thecnological of Paraná, Brazil.
  • Google Scholar


  •  Accepted: 07 February 2014
  •  Published: 15 March 2014

References

Balasubrarnanian V, Lakshminarayanan AK, Varahamoorthy R, Babu S (2009). Application of Response Surface Methodolody to Prediction of Dilution in Plasma Transferred Arc Hardfacing of Stainless Steel on Carbon Steel. J. Iron Steel Res. Int. 16(l):44-53.
Crossref
 
Bond D, D'Oliveira ASCM (2012). Effect of Current and Atomized Grain Size Distribution on the Solidification of Plasma Transferred Arc Coatings. Mater. Res. 15(5):770-774.
Crossref
 
Cinca N, Guilemany JM (2013). Cold Gas Sprayed Stellite-6 Coatings and their Wear Resistance; J. Mater. Sci. Eng. 2(2):1-6.
 
D'Oliveira ASCM, Cristo A, Vaz D (2008). Evaluation of intermetallic coatings processed by PTA. In: International Thermal Spray Conference, aastricht. ITSC Moving Borders CD-ROM:1090-1094.
 
Fei YH, Zao YY, Li HC, Truan SL (2006). Microstructural Characteristics of PTA-Over layed NbC on pure Ti. Surf. Coat. Technol. 200(24):6881-6887.
Crossref
 
Hou Q, Huang Z, Gao J (2007). Effects of Y2O3 on the microstructure and wear resistance of cobalt-based alloy coatings deposited by plasma transferred arc process. Rare Metals. 26(2):103-109.
Crossref
 
Kashani H, Sadeghi Laridjani M, Amadeh A, Khodagholi M, Ahmadzadeh S (2008). The influence of volumetric dilution on the strain induced ϒ for ε martensitic transformation in GTAW processed Co–Cr–Mo alloy. Mater. Sci. Eng. A. 478:38-42.
Crossref
 
Madadi F, Ashrafizadeh F, Shamanian M (2011). Effect of pulse current on microstructure and wear resistance of Stellite6/tungsten carbide claddings produced by tungsten inert gas process. Surf. Coating Technol. 205:4320-4328.
Crossref
 
Madadi F, Ashrafizadeh F, Shamanian M (2012). Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM; J. Alloys Comp. 510:71-77.
Crossref
 
Midha S, Ong HS, Poh LS, Cheang P (2001) Intermetallic coatings produced by TIG surface melting; J. Mater. Process. Technol. 113:516-520.
Crossref
 
Pradeep GRC, Ramesh B, Durga P (2010). A Review Paper on Hardfacing Processes and Materials, Int. J. Eng. Sci. Technol. 2(11):6507-6510.
 
Shin J-C, Doh J-M, Yoon D-Y, Kim J-S (2003). Effect of molybdenum on the microstructure and wear resistance of cobalt-base Stellite hardfacing alloys; Surf. Coatings Technol. 166(2-3):117-126.
Crossref