International Journal of
Physical Sciences

  • Abbreviation: Int. J. Phys. Sci.
  • Language: English
  • ISSN: 1992-1950
  • DOI: 10.5897/IJPS
  • Start Year: 2006
  • Published Articles: 2572

Full Length Research Paper

The effect of overlap length adhesive with bonded in Z type materials

Bahattin IŞCAN1, Hamit ADİN2* and Aydın TURGUT3
1Vocational High School of Batman, University of Batman, Batman, Turkey. 2Department of Mechanical Engineering, University of Batman, Batman, Turkey. 3Department of Mechanical Engineering, University of Fırat, Elazığ, Turkey.
Email: [email protected]

  •  Accepted: 04 April 2011
  •  Published: 04 August 2011

Abstract

The usage of adhesives as connecting method is increasing rapidly in today world. Many of research, development and engineering have been made to find the most important parameters of adhesion. In this study, stress analysis of bonded Z type that connected with various adhesives has been investigated. The adhesive thickness and overlap non-angle was constant but overlap length and overlap angle were varied. This paper has deal with the effect of overlap length on predicting of failure load of adhesive. An effective method for numerical solution in finite element method (FEM) has been performed in analysis. The FEM code employed was ANSYS(10.0). Experimental results were compared with numerical results and were found quite reasonable.

 

Key words: Adhesive, stress analysis, interface, finite element method (FEM).

Copyright © 2024 Author(s) retain the copyright of this article.

This article is published under the terms of the Creative Commons Attribution License 4.0

Back to Vol. 6 No. 15
Back to articles
  • Articles on Google by:
SUBSCRIBE TO RSS
SUBMIT MANUSCRIPT
CONFERENCES