Full Length Research Paper
References
|
Ashuri M, He Q, Shaw L (2016). Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter. Nanoscale 8:74-103. |
|
|
Baker D, Verbrugge M, Xiao X (2017). An approach to characterize and clarify hysteresis phenomena of lithium-silicon electrodes. Journal of Applied Physics 122:165102. |
|
|
Boukamp B, Lesh G, Huggins R (1981). All?Solid Lithium Electrodes with Mixed?Conductor Matrix. Journal of the Electrochemical Society 128:725-729. |
|
|
Bower A, Guduru P, Sethuraman V (2011). A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell. Journal of the Mechanics and Physics of Solids 59:804-828. |
|
|
Chandrasekaran R, Magasinski A, Yushin G, Fuller T (2010). Analysis of Lithium Insertion/Deinsertion in a Silicon Electrode Particle at Room Temperature. Journal of the Electrochemical Society 157:A1139-A1151. |
|
|
Cheng Y, Verbrugge M (2018). The influence of surface mechanics on diffusion induced stresses within spherical nanoparticles. Journal of Applied Physics 104:083521. |
|
|
Christensen J, Newman J (2006). A Mathematical Model of Stress Generation and Fracture in Lithium Manganese Oxide. Journal of the Electrochemical Society 153:A1019. |
|
|
Di Leo C, Rejovitzky E, Anand (2015). Diffusion-deformation theory for amorphous silicon anodes: The role of plastic deformation on electrochemical performance. International Journal of Solids and Structures 67-68:283-296. |
|
|
Hossain A (2021). Development of a mathematical model to study the impact of state of charge dependent exchange current density on the generated voltage hysteresis of silicon anode-based lithium half cells. Journal of Mechanical Engineering Research 12(1):37-48. |
|
|
Hossain A, Cha Y, Song M, Kim S (2020a). Side Reaction Correction and Non-linear Exchange Current Density for Mathematical Modeling of Silicon Anode Based Lithium-Ion Batteries. |
|
|
Hossain A, Masud N, Yasin M, Ali M (2020b). Analysis of the Performance of Microbial Fuel Cell as a Potential Energy Storage Device". Proceedings of International Exchange and Innovation Conference on Engineering & Sciences (IEICES) 6:149-155 |
|
|
Hossain A, Kim S (2020a). Development of a physics-based mathematical model to analyze the limitations of microparticle silicon-based lithium half cells IMECE Technical Presentation. |
|
|
Hossain A, Kim S (2020b). Washington State University, degree granting institution. Development of a Physics-Based Mathematical Model of Microparticle Silicon Based Lithium Half Cells. |
|
|
Hossain A, Masud N, Ali M (2022a). Comprehensive cost analysis of electrochemical performance in microbial fuel cells. Microbial Fuel Cells: Emerging Trends in Electrochemical Applications. IOP Publications 350(1):13. |
|
|
Hossain A, Masud N, Roy S, Ali M (2022b). Investigation of voltage storage capacity for the variation of electrode materials in microbial fuel cells with experimentation and mathematical modelling. International Journal of Water Resources and Environmental Engineering. 14(4):97-109. |
|
|
Jagannathan M, Chandran K (2014). Analytical modeling and simulation of electrochemical charge/discharge behavior of Si thin film negative electrodes in Li-ion cells. Journal of Power Sources 247:667-675. |
|
|
Jin C, Li H, Song Y, Lu B, Soh A, Zhang J (2019). On stress-induced voltage hysteresis in lithium ion batteries: Impacts of surface effects and inter-particle compression. Science China Technological Sciences 62:1357-1364. |
|
|
Jin Y, Zhu B, Lu Z, Liu N, Zhu J (2017). Challenges and Recent Progress in the Development of Si Anodes for Lithium-Ion Battery. Advanced Energy Materials 7:1700715. |
|
|
Li J, Dudney N, Xiao X, Cheng Y, Liang C, Verbrugge M (2014). Asymmetric Rate Behavior of Si Anodes for Lithium-Ion Batteries: Ultrafast Delithiation versus Sluggish Lithiation at High Current Densities. Advanced Energy Materials 5:1401627. |
|
|
Liang B, Liu Y, Xu Y (2014). Silicon-based materials as high capacity anodes for next generation lithium ion batteries. Journal of Power Sources 267:469-490. |
|
|
Lu B, Song Y, Zhang Q, Pan J, Cheng Y, Zhang J (2016). Voltage hysteresis of lithium ion batteries caused by mechanical stress. Physical Chemistry Chemical Physics 18:4721-4727. |
|
|
Masud N, Hossain A, Moresalein M, Ali M (2021). Performance Evaluation of Microbial Fuel Cell with Food Waste Solution as a Potential Energy Storage Medium. Proceedings of International Exchange and Innovation Conference on Engineering and Sciences 7:96-102. |
|
|
Ojeda B, Waliullah M, Hossain A, Nguyen T, Wettstein T, Tadesse Y, Bernal R (2022). High-throughput tensile testing of silver nanowires. Extreme Mechanics Letters 101896. |
|
|
Pal S, Damle S, Patel S, Datta M, Kumta P, Maiti S (2014). Modeling the delamination of amorphous-silicon thin film anode for lithium-ion battery. Journal of Power Sources 246:149-159. |
|
|
Pharr M, Suo Z, Vlassak J (2013). Measurements of the fracture energy of lithiated silicon electrodes of li-ion batteries. Nano Letters 13:5570-5577. |
|
|
Safari M, Delacourt C (2011). Mathematical Modeling of Lithium Iron Phosphate Electrode: Galvanostatic charge/discharge and path dependence. Journal of the Electrochemical Society 158(2):A63-A73. |
|
|
Sethuraman V, Srinivasan V, Bower A, Guduru P (2010). In Situ Measurements of Stress-Potential Coupling in Lithiated Silicon. Journal of The Electrochemical Society 157:A1253. |
|
|
Sethuraman V, Srinivasan V, Newman J (2012). Analysis of Electrochemical Lithiation and Delithiation Kinetics in Silicon. Journal of The Electrochemical Society 160:A394-A403. |
|
|
Sikha G, De S, Gordon J (2014). Mathematical model for silicon electrode - Part I. 2-d model. Journal of Power Sources 262:514-523. |
|
|
Song Y, Soh A, Zhang J (2016). On stress-induced voltage hysteresis in lithium ion batteries: impacts of material property, charge rate and particle size. Journal of Materials Science, pp. 9902-9911. |
|
|
Tanim T, Rahn C, Wang C (2015). State of charge estimation of a lithium-ion cell based on a temperature dependent and electrolyte enhanced single particle model. Energy 80:731-739. |
|
|
Tarascon J, Armand M (2001). Issues and challenges facing rechargeable lithium batteries. Nature 414:359-367. |
|
|
Verbrugge M, Baker D, Xiao X, Zhang Q, Cheng Y (2015). Experimental and Theoretical Characterization of Electrode Materials that Undergo Large Volume Changes and Application to the Lithium-Silicon System. The Journal of Physical Chemistry C 119:5341-5349. |
|
|
Verbrugge M, Cheng Y (2019). Stress Distribution within Spherical Particles Undergoing Electrochemical Insertion and Extraction. ECS Transactions 16:127-139. |
|
|
Wang C, Wu H, Chen Z, McDowell M, Cui Y, Bao Z (2013). Self-healing chemistry enables the stable operation of silicon microparticle anodes for high-energy lithium-ion batteries. Nature Chemistry 5:1042-1048. |
|
|
Wang M, Xiao X, Huang X (2017). A multiphysics microstructure-resolved model for silicon anode lithium-ion batteries. Journal of Power Sources 348:66-79. |
|
|
Wu H, Cui Y (2012). Designing nanostructured Si anodes for high energy lithium ion batteries. Nano Today 7:414-429. |
|
|
Zhang W (2010). A review of the electrochemical performance of alloy anodes for lithium-ion batteries. Journal of Power Sources 196:13-24. |
|
|
Zhang X, Shyy W, Marie Sastry A (2007). Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles. Journal of The Electrochemical Society 154:A910. |
|
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0
