Journal of
Chemical Engineering and Materials Science

  • Abbreviation: J. Chem. Eng. Mater. Sci.
  • Language: English
  • ISSN: 2141-6605
  • DOI: 10.5897/JCEMS
  • Start Year: 2010
  • Published Articles: 96

Full Length Research Paper

Effect of dioctyl phthalate (DOP) modified matrix on the thermal stability of glass fiber reinforced composite

Muhammed Tijani Isa
  • Muhammed Tijani Isa
  • Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
  • Google Scholar
Abdulkarim Salawu Ahmed
  • Abdulkarim Salawu Ahmed
  • Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria.
  • Google Scholar
Benjamin Olufemi Aderemi
  • Benjamin Olufemi Aderemi
  • Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
  • Google Scholar
Razaina Mat Taib
  • Razaina Mat Taib
  • School of Materials and Mineral Resources, University of Sains Malaysia, 14300, Nibong Tebal Penang, Malaysia.
  • Google Scholar
Hazizan Md Akil
  • Hazizan Md Akil
  • School of Materials and Mineral Resources, University of Sains Malaysia, 14300, Nibong Tebal Penang, Malaysia.
  • Google Scholar
Ibrahim Ali Mohammed-Dabo
  • Ibrahim Ali Mohammed-Dabo
  • Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
  • Google Scholar


  •  Received: 20 August 2014
  •  Accepted: 18 September 2014
  •  Published: 31 October 2014

References

Akter R, Sultana R, Alam MZ, Qadir MR, Ara Begum MH, AbdulGafur M (2013). Fabrication and characterization of woven natural fiber reinforced unsaturated polyester resin composites. Int. J. Engr. Technol. 13(2):122-128.
 
Bakar M, Djaider F (2007). Effect of plasticizers content on the mechanical properties of unsaturated polyester resin. J. Thermoplast. Comp. Mat. 20:53-64.
Crossref
 
Bryson JA (1999). Plastic material, Butterworths Heinemann, Oxford.
 
Cherian AB, Thachil ET (2006). Epoxidised phenolic novalac: A novel modifier for unsaturated polyester resin. J. App. Poly. Sci. 1(100):457- 465.
Crossref
 
Dutra RCL Soares BG, Campos EA, Silva JLG (2000). Hybrid composites based on polypropylene and carbon fiber and epoxy matrix. Polymer 41:3841-3849.
Crossref
 
Hosur MH, Abdullah M, Jeelani S (2005). Studies on the low velocity impact response of woven hybrid composites. Comp. Struc. 67:253-262.
Crossref
 
Huda MS, Drazel LT, Mohanty AK, Misra M (2007). The effect of silane treatment- and untreated-talc on the mechanical and physio-mechanical properties of poly(lacticacid)/newspaper fibers/talc hybrid composites. Comp. Part B. 38:367-379.
Crossref
 
Isa MT, Ahmed AS, Aderemi BO, Taib RM, Mohammed-Dabo IA (2012). Effect of dioctyl phthalate on the properties of unsaturated polyester resin. Int. J. Mat. Sci. 7(1):9-20.
 
Isa MT, Ahmed AS, Aderemi BO, Taib RM, Mohammed-Dabo IA (2013). Effect of fiber type and combinations on the mechanical, physical and thermal stability properties of polyester hybrid composites. Comp. Part B. 52:217-223.
Crossref
 
Kalavenness TM, Reichold AS (2009). Thermal endurance of unreinforced unsaturated polyesters and vinyl ester resin. American Composites Manufacturers Association. Comp. Polycon, Tampa, FL, USA.
 
Mangalgiri PD (2005). Polymer- matrix composites for high-temperature applications. Def. Sci. J. 55(2):175-193.
 
Morye SS, Hine PJ, Duckett RA, Carr DJ, Ward IM (2000). Modeling the effect of the energy absorption by polymer composites upon ballistic impact. Comp. Sci. Technol. 60:2631-2642.
Crossref
 
Muhi RJ, Najim F, De Moura MFSF (2009). The effect of hybridization on the GFRP behavior under high velocity impact. Comp. Part B. 40:783-803.
Crossref
 
Pukansky B (2005). Interfaces and interphases, in multi component materials: Past, present, future. Europ. Polym. J. 41:645-662.
Crossref
 
Rout J, Misra M, Tripathy SS, Nayak SK, Mohanty AK (2001). The influence of fiber treatment on the performance of coir-polyester composites. Comp. Sci. Technol. 61:1303-1310.
Crossref
 
Saravana BD, Mohan KGC (2013). Thermal properties of maize fiber reinforced unsaturated polyester resin composites. Proceedings of the World Congress of Engineering, 3: London UK
 
Shaker ZG, Browne RM, Stretz HA, Cassidy PE, Blanda MT (2002). Epoxy toughened unsaturated polyester interpenetrating networks. J. App. Polym. Sci. 84:2283-2286.
Crossref
 
Shimaa ME, Reem KF (2012). Mechanical, thermal and barrier properties of unsaturated polyester Nanocomposites based on pet-waste for polymer concrete. Glob. Adv. Res. J. Engr. Technol. Inv. 1(1):016-024.
 
Thanomsilp C, Hogg PJ (2003). Penetration impact resistance of hybrid composites based on commingled yarn fabrics. Comp. Sci. Technol. 63:467-482.
Crossref
 
Wan YZ, Chen GC, Huang Y, Li QY, Zhou FG, Xin JY, Wang YL (2005). Characterization of three- dimensional braided carbon/Kevlar hybrid composites for orthopedic usage. Mat. Sci. Engr. A. 398:227-232.
Crossref
 
Wong WH, Champion SM, Watson CH (2001). The effect of matrix type on the ballistic and mechanical performance of E-glass composite Armour, 19th International symposium of Ballistic. 7-11 May. Interlaken Switzerland, pp.1099-1106.