Full Length Research Paper
References
Ariyadi B, Sih WA, Ketahanan G (2010). Polymer Modified Concrete dengan Menggunakan Kopolimer Lateks Alam Sebagai Aditif Beton, Research report, Bandung. |
|
Box GE, Hunter JS, Hunter WG (2005). Statistics for experimenters: design, innovation, and discovery 2. New York: Wiley-Interscience. |
|
Elalaoui O, Ghorbel E, Mignot V, Ouezdou MB (2012). Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250 C. Constr. Build. Mater. 27(1):415-424. |
|
João AR (2009). Interfacial interactions in concretes with silica fume and SBR latex. Constr. Build. Mater. 23. |
|
Marga U (2007). Teknologi lateks alam iradiasi, Solusi problema produksi barang karet, Pusat Pengembangan Informatika Nuklir BATAN. |
|
Muhammad B, Ismail M (2012). Performance of natural rubber latex modified concrete in acidic and sulfated environments. Constr. Build. Mater. 31:129-134. |
|
Muhammad B, Ismail M, Bhutta MAR, Abdul-Majid Z (2012). Influence of non-hydrocarbon substances on the compressive strength of natural rubber latex-modified concrete. Constr. Build. Mater. 27(1):241-246. |
|
Pacheco-Torgal F, Jalali S (2009). Sulphuric acid resistance of plain, polymer modified, and fly ash cement concretes. Constr. Build. Mater. 23(12):3485-3491. |
|
Sih WA (2007). Studi pemanfaatan kopolimer lateks alam styrena sebagai pemodifikasi beton, Thesis. |
|
Wahby WS (2003). Fifty Years' History of Polymers in Concrete in Review. Special Publication 214:13-22. |
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0