Full Length Research Paper
References
APHA (1998). Standard methods for the examination of water and wastewater. 20th ed, Washington, D.C. |
|
Awofolu O, Mbolekwa Z, Mtshemla V, Fatoki O (2005). Levels of trace metals in water and sediments of Tyume River and its effect on the irrigated farmland. J. Water Sanit. 31:87-94. |
|
Bartram J, Balance R (1996). Water quality monitoring: A practical guide to the design and implementation of fresh water quality studies and monitoring programmes. 1st ed, Chapman & Hall, London. 400 p. |
|
Bosnic M, Buljan J, Daniels R (2000). Pollutants in tannery effluents. Definitions and environmental impact, limits for discharge into water bodies and sewers. UNIDO. Regional programme for pollution control in the tanning industry in South-East Asia. US/RAS/92/120. |
|
Chapman D (1996). Water quality assessments: A guide to the use of Biota, sediments and water in environmental monitoring, 2nd ed., London, U.K.: Chapman and Hall Ltd. 651 p. |
|
EEPA (2001). Situation analysis; the industrial sector. ESID project US/ETH/99/068/ETHIOPIA, EPA/UNIDO. Addis Ababa. |
|
ETPI (1998). Environmental report of the leather sector, draft final report, environmental technology program for industry, Karachi, Pakistan. |
|
Haruna A, Uzairu A, Harrison G (2009). Monitoring of sewage quality for small – scale irrigation: case studies in some Fadama Lands in Zaria city, Nigeria. Cont. J. Appl. Sci. 4:8-17. |
|
Ludvick J (2000). The scope for decreasing pollution load in leather processing. Regional programme for pollution control in the tanning industry in South East Asia. UNIDO. US/RAS/92/120/11-51. |
|
Mondal N, Saxena V, Singh V (2005). Impact of pollution due to tanneries on groundwater regime. Curr. Sci. 88(12):25. |
|
Petruzzelli D, Passino R and Tiravanti G (1995). Ion exchange process for chromium removal and recovery from tannery wastes. J. Ind. Eng. Chem. Res. 34:2612-2617. |
|
Ramasami T, Prasad B (1991). Environmental aspects of leather processing. J. Indian Leather Technol. Assoc. India 2:43-71. |
|
Tariq S, Shah M, Shaheen N, Khalique A, Manzoor S, Jaffar M (2006). Multivariate analysis of trace metal levels in tannery effluents in relation to soil and water: A case study from Peshawar, Pakistan. J. Environ. Manage. 79:20-29. |
|
Tariq S, Shaheen N, Khalique A, Shah M (2010). Distribution, correlation and source apportionment of selected metals in tannery effluents related soils and ground water a case study from Multan, Pakistan. J. Environ. Monit. Assess. 166:303-312. |
|
Teodorescu M, Gaidau C (2007). Possible steps to follow for filling the gap between requirements and the real condition in tanneries. J. Clean. Prod. 16:622-631. |
|
UNIDO (1991). Leather industry. Conference on ecologically sustainable industrial development. Case study No. 3. ID/WG.516/10. UNIDO Secretariat, Copenhagen, Denmark. |
|
UNIDO (2000). Pollutants in tannery effluents. Regional program for pollution control in the tanning industry in south-east Asia. UNIDO. |
|
USEPA (1986). Quality criteria for water ('Gold Book'): Office of water regulations and standards, EPA-440/5-86-001 Washington, D.C. |
|
Weber-Scannell P, Duffy I (2007). Effects of total dissolved solids on aquatic organisms: A review of literature and recommendation for salmonid species. Am. J. Environ. Sci. 3(1):1-6. |
|
Wiegant W, Kalker T, SontakkeV, Zwaag R (1999). Full scale experience with tannery water management: An integrated approach. Water Sci. Technol. 39:169-176. |
|
World Bank (1998). Pollution prevention and abatement: tanning and leather finishing. Draft technical background document. Washington, D.C. |
|
Zinabu G, Zerihun D (2002). The chemical compostion of the effluent from Awassa Textile Factory and its effects on aquatic biota. SINET: Ethiop. J. Sci. 25(2):263-274. |
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0