Journal of
Engineering and Technology Research

  • Abbreviation: J. Eng. Technol. Res.
  • Language: English
  • ISSN: 2006-9790
  • DOI: 10.5897/JETR
  • Start Year: 2009
  • Published Articles: 198

Full Length Research Paper

Analysis and parametric optimization of flux cored arc welding process for IS 2062 mild steel plates using Taguchi method and utility concept

P. Sreeraj
  • P. Sreeraj
  • Department of Mechanical Engineering, Younus College of Engineering and Technology, Kerala, 691010 India
  • Search for this author on:
  • Google Scholar
T. Kannan
  • T. Kannan
  • SVS College of Engineering, Coimbatore, Tamilnadu, 642109 India
  • Search for this author on:
  • Google Scholar
S. Maji
  • S. Maji
  • Department of Mechanical Engineering, IGNOU, Delhi, 110068, India
  • Search for this author on:
  • Google Scholar


  •  Received: 19 June 2014
  •  Accepted: 29 September 2014
  •  Published: 03 November 2014

References

Cochran WG, Coxz GM (1987). Experimental Design., New York, John Wiley & Sons. P. 370.
 
Dawei Z, Yuanxun W, Suning S, Zongguo L (2013). Multi objective optimal design of small scale resistance spot welding process with principal component analysis and response surface methodology. J. intell. manuf.
Crossref
 
 
Gunaraj V, Murugan N (1999). Prediction and comparison of the area of the heat effected zone for the bead on plate and bead on joint in SAW of pipes, J. Mater. Process. Technol. 95:246-261.
Crossref
 
 
Kannan TY (2010). Effect of process parameters on clad bead geometry and shape relationships of stainless steel cladding deposited by GMAW. Int. J. Manuf. Technol. 47:1083-1095.
Crossref
 
 
Kannan T, Murugan N, Sreeharan BN (2013). Optimization of flux cored arc welding process parameter using genetic and memetic algorithms. J. Manuf. Sci. Prod. 13(4):239-250.
 
 
Jagannatha N, Hiremath SS, Sadashivappa K (2012). Analysis and parametric optimization of abrasive hot air jet machining for glass using Taguchi method and utility concept. Int. J. Mech. Mater. Eng. 7(1):9–15.
 
 
Montgomery DC (2003). Design and analysis of Experiments, John Wiley & Sons (ASIA) Pvt. Ltd.
 
 
Norasiah M, Manurung Y, Hafidzi M, Abas S, Tham G, Haruman E (2012). Optimization and modelling of spot welding parameters with simultaneous response consideration using multi objective Taguchi method and utility concept. J. Mech. Sci. Technol. 26(8):2365-2370.
Crossref
 
 
Saurav D, Ashish B, Pradip KP (2008). Grey based Taguchi method for optimization of bead geometry in submerged arc bead on plate welding. Int. J. Adv. Manuf. Technol. 39:1136-1143.
Crossref
 
 
Somashekher L, Hiremath S (2013). Response surface modelling of micro holes in electro chemical discharge machining process. Proceed Engr. 64:1335-1404.
 
 
Tarng YS, Yang WH (1998) Optimization of weld bead geometry in gas tungsten arc welding by the Taguchi method. Int. J. Adv. Manuf. Technol. 14:549-554.
Crossref
  

 

Copyright © 2024 Author(s) retain the copyright of this article.

This article is published under the terms of the Creative Commons Attribution License 4.0

Back to Vol. 6 No. 7
Back to articles
SUBSCRIBE TO RSS
SUBMIT MANUSCRIPT
CONFERENCES