Full Length Research Paper
References
|
Duxson P, Provis JL, Lukey GC, Mallicoat SW, Kriven WM, Van Deventer JSJ (2005). Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Colloids and Surfaces: Colloids and Surfaces A: Physicochemical and Engineering Aspects 269:47-58. |
|
|
Iniaghe PO, Adie GU, Osibanjo O (2013). Assessment of toxic heavy metals levels in obsolete computer monitor components discarded within vicinities of electronic workshops. Toxicological and Environmental Chemistry 95:1108-1115. |
|
|
Jang YC, Townsend TG (2003). Leaching of Lead from Computer Printed Wire Boards and Cathode Ray Tubes by Municipal Solid Waste Landfill Leachates. Environmental Science and Technology 37:4778-4784. |
|
|
Kim D, Petrisor IG, Yen TF (2005). Evaluation of biopolymer-modified concrete systems for disposal of cathode ray tube glass. Journal of the Air and Waste Management Association 55(7):961-969. |
|
|
Kumar A, Kumar S (2013). Development of paving blocks from synergistic use of red mud and fly ash using geopolymerisation. Construction and Building Materials 38:865-871. |
|
|
Lairaksa N, Moon AR, Makul N (2013). Utilisation of cathode ray tube waste: encapsulation of PbO-containing funnel glass in Portland cement clinker. Journal of Environmental Management 117:180-186. |
|
|
Ling TC, Poon CS (2011). Utilisation of recycled glass derived from cathode ray tube glass as fine aggregate in cement mortar. Journal of Hazardous Materials 192(2):451-456. |
|
|
Ling TC, Poon CS (2012). A comparative study on the feasible use of recycled beverage and CRT funnel glass as fine aggregate in cement mortar. Journal of Cleaner Production 29-30:46-52. |
|
|
Ogundiran MB, Ikotun OJ (2014). Investigating the Suitability of Nigerian calcined kaolins as raw materials for geopolymer binders. Transactions of the Indian Ceramic Society 73(2):138-142. |
|
|
Ogundiran MB, Kumar S (2015). Synthesis and characterisation of geopolymer from Nigerian Clay. Applied Clay Science 108:173-181. |
|
|
Ogundiran MB, Nugteren HW, Witkamp GJ (2013). Immobilisation of lead smelting slag within spent aluminate-fly ash based geopolymers. Journal of Hazardous Materials 248-249:29-36. |
|
|
Ogundiran MB, Sanjay K (2016). Synthesis of fly ash-calcined clay geopolymers: Reactivity, mechanical strength, structural and microstructural characteristics. Construction and Building Materials 125:450-457. |
|
|
Ogundiran MB, Winjobi FA (2015). The potential of binary blended geopolymer binder containing Ijero-Ekiti calcined kaolin clay and ground waste window glass. African Journal of Pure and Applied Chemistry 9(7):159-166. |
|
|
Pacheco-Torgal F, Castro-Gomes J, Jalali S (2007). Investigations about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders. Cement and Concrete Research 37:933-941. |
|
|
Saeed A, Zhang L (2012). Production of eco-friendly bricks from copper mine tailings through geopolymerisation. Construction and Building Materials 29:323-331. |
|
|
Shao Y, Lefort T, Moras S, Rodriguez D (2000). Studies on concrete containing ground waste glass. Cement and Concrete Research 30:91-100. |
|
|
Singh N, Li J, Zeng X (2017). Global responses for recycling waste CRTs in e-waste. Waste Management 57:187-197. |
|
|
Singh N, Li J, Zeng, X (2016). Solutions and challenges in recycling waste cathode-ray tubes. Journal of Cleaner Production 133:188-200. |
|
|
Sua-iam G, Makul N (2013). Use of limestone powder during incorporation of Pb-containing cathode ray tube waste in self-compacting concrete. Journal of Environmental Management 128:931-940. |
|
|
van Jaarsveld JGS, van Deventer JSJ (1996). The Potential Use of Geopolymeric Materials to Immobilise Toxic Metals. Part I: Theory and Applications. Minerals Engineering 10(7):659-669. |
|
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0
