A study on the role of processing parameters in joining polyethylene sheets via heat assisted friction stir welding: Investigating microstructure, tensile and flexural properties

Amir Mostafapour; Ehsan Azarsa

doi:10.5897/IJPS11.1653

International Journal of
Physical Sciences

Abbreviation: Int. J. Phys. Sci.
Language: English
ISSN: 1992-1950
DOI: 10.5897/IJPS
Start Year: 2006
Published Articles: 2572

Full Length Research Paper

A study on the role of processing parameters in joining polyethylene sheets via heat assisted friction stir welding: Investigating microstructure, tensile and flexural properties

Amir Mostafapour and Ehsan Azarsa*

Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran.
Email: [email protected]

Article Number - 6BD28C216395
Vol.7(4), pp. 647 - 654 , January 2012
https://doi.org/10.5897/IJPS11.1653

Accepted: 15 December 2011
Published: 23 January 2012

Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0.

CrossRef Citations (20)

See more citations on Google Scholar

1.

Wibawa Putu,Razzaqi Akbar,Abdullah Kharis,Wulandari Kiki,Sumardiono S,Restu Eriek,Gafur Abdul, . (2023) Analysis of tensile and flexural strength of HDPE material joints in ship construction . Journal of Applied Engineering Science

2.

Kusharjanta Bambang,Soenoko Rudy,Purnowidodo Anindito,Surya Irawan, . (2022) Analysis of tensile strength, crystallinity, crystallite size, and thermal stability of polypropylene joined by friction stir welding . Journal of Applied Engineering Science

3.

Ülker Aydın,Sayer Sami,Ceyhun Vural, . (2016) Welding parameters and joint strength optimization during friction stir welding of high density polyethylene (HDPE) using the Taguchi method . Materials Testing

4.

Friction Stir Welding and Processing

5.

Wilkins Lucas T.,Strauss Alvin M., . (2023) Post-weld annealing of friction stir welded carbon fiber reinforced low-melt polyaryletherketone . Journal of Composite Materials

6.

Bouha Djilali,Khellafi Habib,Ould Chikh El Bahri,Meddah Hadj Miloud,Kaou Abdellah, . (2022) Effect of Tool Design on the Mechanical Properties of Bobbin Friction Stir Welded High-Density Polyethylene Sheets: Experimental Study . International Journal of Engineering Research in Africa

7.

Eslami Shayan,Tavares Paulo J.,Moreira P. M. G. P., . (2017) Friction stir welding tooling for polymers: review and prospects . The International Journal of Advanced Manufacturing Technology

8.

Lambiase F.,Paoletti A.,Di Ilio A., . (2016) Effect of tool geometry on loads developing in friction stir spot welds of polycarbonate sheets . The International Journal of Advanced Manufacturing Technology

9.

Paoletti A.,Lambiase F.,Di Ilio A., . (2016) Analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers . The International Journal of Advanced Manufacturing Technology

10.

CAD/CAM, Robotics and Factories of the Future

11.

Farooq Umer,Khan Imran,Asif Muhammad,Hira Fatima,Hussain Ghulam,Ullah Azaz,Ahmad Syed Mukhtar,Umar Muhammad,Alhassan Mohamed Abulgasim, . (2020) Investigation on the effects of the processing parameters and the number of passes on the flexural properties of polymer nanocomposite fabricated through FSP method . Materials Research Express

12.

Arif Mohammad,Kumar Dilip,Siddiquee Arshad Noor, . (2024) Morphological and Mechanical Characterization of Friction Stir Welded Zones in Acrylonitrile Butadiene Styrene (ABS) Polymer . Journal of Materials Engineering and Performance

13.

Yildiz Mustafa,Ozturk Fahrettin,Sheikh-Ahmad Jamal, . (2023) A Comprehensive Review on Friction Stir Welding of High-Density Polyethylene . Arabian Journal for Science and Engineering

14.

Shah Farooq,Younas Muhammad,Khan Mushtaq,Khan Ashfaq,Khan Zarak,Khan Nawar, . (2023) Mechanical properties and weld characteristics of friction stir welding of thermoplastics using heat-assisted tool . Welding in the World

15.

Abu-Okail Mohamed,Ata Moataz H, . (2019) Enhancement ductility of friction stir welded aluminum blanks AA2024 via adding interlayer strip width of AA7075 . Materials Research Express

16.

Lambiase F.,Paoletti A.,Di Ilio A., . (2017) Friction spot stir welding of polymers: control of plunging force . The International Journal of Advanced Manufacturing Technology

17.

Lambiase F.,Paoletti A.,Di Ilio A., . (2017) Effect of tool geometry on mechanical behavior of friction stir spot welds of polycarbonate sheets . The International Journal of Advanced Manufacturing Technology

18.

Omer Mohamed A. E.,Rashad Maher,Elsheikh Ammar H.,Showaib Ezzat A., . (2022) A review on friction stir welding of thermoplastic materials: recent advances and progress . Welding in the World

19.

Imtiaz Abid,Tariq Adnan,Janjua Ajaz Bashir,Sarfraz Fahad,Khawaja Amar ul Hassan, . (2021) Parametric Optimization of Butt Welded Polycarbonate using Response Surface Methodology . Mehran University Research Journal of Engineering and Technology

This article is published under the terms of the Creative Commons Attribution License 4.0

Back to Vol. 7 No. 4

Back to articles

Views: 0
Downloads: 0

Related Articles:
On Google
On Google Scholar

Articles on Google by:

International Journal of Physical Sciences

A study on the role of processing parameters in joining polyethylene sheets via heat assisted friction stir welding: Investigating microstructure, tensile and flexural properties

Amir Mostafapour and Ehsan Azarsa*

International Journal of
Physical Sciences