Full Length Research Paper
References
|
Acheampong A, Kankam CK, Ayarkwa J (2016). Shear behaviour of palm kernel shell reinforced concrete beams without shear Reinforcement: Influence of beam depth and tension steel. J. Civil Eng. Constr. Technol. 7:8-19. |
|
|
Adeagbo DO (1999). Effect of Water-Cement Ratio on the Properties of Sandcrete Cubes when Artially Replaced with Sawdust. J. Eng. Sci. 3:187-192. |
|
|
Afshinnia K, Rangaraju PR (2016). Impact of combined use of ground glass powder and crushed glass aggregate on selected properties of Portland cement concrete. Constr. Build. Mater. 117:263-272. |
|
|
Ali M, Li X, Chouw N (2013). Experimental investigations on bond strength between coconut fibre and concrete. Mater. Des. 44:596-605. |
|
|
Alnuaimi AS (2012). Effects of Copper Slag as a Replacement for Fine Aggregate on the Behavior and Ultimate Strength of Reinforced Concrete Slender Columns 90-102. |
|
|
Antiohos SK, Papadakis VG, Tsimas S (2014). Rice husk ash (RHA) effectiveness in cement and concrete as a function of reactive silica and fineness. Cem. Concr. Res. 61:20-27. |
|
|
Basar HM, Deveci AN (2012). The effect of waste foundry sand (WFS) as partial replacement of sand on the mechanical, leaching and micro-structural characteristics of ready-mixed concrete. Constr. Build. Mater. 35:508-515. |
|
|
Berra M, Mangialardi T, Paolini AE (2015). Reuse of woody biomass fly ash in cement-based materials. Constr. Build. Mater. 76:286-296. |
|
|
Cheah CB, Ramli M (2011). The implementation of wood waste ash as a partial cement replacement material in the production of structural grade concrete and mortar: An overview. Resour. Conserv. Recycl. 55:669-685. |
|
|
Dehwah HAF (2012). Corrosion resistance of self-compacting concrete incorporating quarry dust powder, silica fume and fly ash. Constr. Build. Mater. Non Destructive Techniques for Assessment of Concrete 37:277-282. |
|
|
Dilip K, Smita S, Neetesh K, Ashish G (2014). Low Cost Construction Material for Concrete as Sawdust. Glob. J. Res. Eng. 14:4. |
|
|
Galetakis M, Piperidi C, Vasiliou A, Alevizos G, Steiakakis E, Komnitsas K, Soultana A (2016). Experimental investigation of the utilization of quarry dust for the production of microcement-based building elements by self-flowing molding casting. Constr. Build. Mater. 107:247-254. |
|
|
Gameiro F, de Brito J, Correia da Silva D (2014). Durability performance of structural concrete containing fine aggregates from waste generated by marble quarrying industry. Eng. Struct. 59:654-662. |
|
|
Gastaldi D, Canonico F, Capelli L, Buzzi L, Boccaleri E, Irico S (2015). An investigation on the recycling of hydrated cement from concrete demolition waste. Cem. Concr. Compos. 61:29-35. |
|
|
Horsakulthai V, Phiuvanna S, Kaenbud W (2011). Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage. Constr. Build. Mater. 25:54-60. |
|
|
Jelle M, Prachi S, Ria K (2001). Sokoban Wood Village Project in Kumasi, Ghana. |
|
|
Lei W, Deng Y, Zhou M, Xuan L, Feng Q, 2006. Mechanical properties of nano SiO2 filled gypsum particleboard. Trans. Nonferrous Met. Soc. China 16:361-364. |
|
|
Mehta PK, Monteiro PJM (2006). Concrete-Microstructure, Properties, and Materials. McGraw-Hill Publishing, 2006. |
|
|
Qasrawi H, Shalabi F, Asi I (2009). Use of low CaO unprocessed steel slag in concrete as fine aggregate. Constr. Build. Mater. 23:1118-1125. |
|
|
Ramos T, Matos AM, Sousa-Coutinho J (2013). Mortar with wood waste ash: Mechanical strength carbonation resistance and ASR expansion. Constr. Build. Mater. 49:343-351. |
|
|
Rashad AM (2016). A comprehensive overview about recycling rubber as fine aggregate replacement in traditional cementitious materials. Int. J. Sustain. Built Environ. 5:46-82. |
|
|
Sarkar M, Asaduzzaman M, Das AK, Hannan MO, Shams MI (2012). Mechanical properties and dimensional stability of cement bonded particleboard from rice husk and sawdust. Bangladesh J. Sci. Ind. Res. 47:273-278. |
|
|
Shafigh P, Mahmud H, Jumaat MZ, Ahmmad R, Bahri S (2014). Structural lightweight aggregate concrete using two types of waste from the palm oil industry as aggregate. J. Cleaner Prod. 80:187-196. |
|
|
Shen W, Yang Z, Cao L, Cao L, Liu Y, Yang H, Lu Z, Bai J (2016). Characterization of manufactured sand: Particle shape, surface texture and behavior in concrete. Constr. Build. Mater. 114:595-601. |
|
|
Singh M, Siddique R (2014). Compressive strength, drying shrinkage and chemical resistance of concrete incorporating coal bottom ash as partial or total replacement of sand. Constr. Build. Mater. 68:39-48. |
|
|
Torkaman J, Ashori A, Sadr Momtazi A (2014). Using wood fiber waste, rice husk ash, and limestone powder waste as cement replacement materials for lightweight concrete blocks. Constr. Build. Mater. 50:432-436. |
|
|
Turgut P (2007). Cement composites with limestone dust and different grades of wood sawdust. Build. Environ. 42:3801-3807. |
|
|
Yong C, Wen Y, Chaoyong Z, Huanhuan L, Jian H (2013). The implementation of waste sawdust in concrete. Engineering 5(12):943-947. |
|
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0
