Anvari A (2014). Fatigue life prediction of unidirectional carbon fiber/epoxy composite in Earth orbit. Int. J. Appl. Math. Mech. 10(5):58-85.

Anvari A (2016). Friction coefficient variation with sliding velocity in copper with copper contact. Periodica Polytechnica, Mechanical Engineering. 60(3):137.

Anvari A (2017). Crack growth as a function of temperature variation in carbon fiber/epoxy. J. Chem. Eng. Mater. Sci. 8(3):17-30.
Crossref

Anvari A (2017). Effect of nano carbon percentage on properties of composite materials. J. Chem. Eng. Mater. Sci. 8(4):31-36.

Anvari A (2017). Failure of Nickel-base super alloy (ME3) in aerospace gas turbine engines. J. Chem. Eng. Mater. Sci. 8(6):46-65.
Crossref

Adibnazari S, Anvari A (2017). Frictional effect on stress and displacement fileds in contact region. J. mech. eng. res. 9(4):34-45.

Biro T, Csizmadia J (2012). recent technique for thermal-fatigue simulation of heat-resistant steels. periodica polytechnica, Mechanical Engineering. 56(2):107-112.

Diego A, Charles UR (2014). Symposium keynote: Enduring the isolation of interplanetary travel a personal account of the Mars500 mission. Acta Astronautica. 93:374-383.
Crossref

Des Marias DJ (2010). Exploring Mars for Evidence of Habitable Environments and Life. Proceeding of the American philosophical society. 154(4):402-422.

Fujita K, Ozawa T, Okudaira K, Mikouchi T, Suzuki T, Takayanagi H, Tsuda Y, Ogawa, N, Tachibana S, Satoh T (2014). Conceptual study and key technology development for Mars Aeroflyby sample collection. Acta Astronautica. 93:84-93.
Crossref

Funk JG, Sykes GF (1989). The effects of simulated space environmental parameters on six commercially available composite materials. NASA Technical Paper 2906. Washington DC: National Aeronautics and Space Administration.

Gao Y, He S, Yang D, Liu Y, Li Z (2005). Effect of vacuum thermo-cycling on physical properties of unidirectional M40J/AG-80 composites. Compos. Part B: Eng. 36:351-358.
Crossref

Giannadakis K, Varna J (2009). Effect of thermal aging and fatigue on failure resistance of aerospace composite materials. 5th International EEIGM/AMASE/FORGEMAT conference on Advanced Materials Research, IOP Conf. Series: Materials Science and Engineering 5, 012020:1-9. 
Crossref

Guo W, X ue P, Yang J (2013). Nonlinear progressive damage model for composite laminates used for low-velocity impact. Applied Mathematics and Mechanics (English Edition). 34(9):1145-1154.
Crossref

Harris BED (2003). Fatigue in Composites. Woodhead Publishing Limited, Cambridge, UK.

Hertzberg RW (1989). Deformation and Fracture Mechanics of Engineering Materials. Wiley. 467.

Karadeniz ZH, Kumlutas D (2007). A numerical study on the thermal expansion coefficients of fiber reinforced composite materials. Master of science Thesis in mechanical engineering, Energy program, Dokuz Eylul University.

Liu S, Nairn JA (1990). Fracture mechanics analysis of composite microcracking: Experimental results in fatigue. Proceeding of the 5th Technical Conference on Composite Materials, American Society of Composites, East Lansing, Michigan 6:287-295.

Maheswari TS Uma, Prasad P Hari (2013). Reliability of Thermal strain and stresses in simple bars. IOSR J. Math. 5(2):05-09.

Malekzadeh Fard K, Monfared MM, Norouzipour K (2013). Determination of stress intensity factor in half-plane containing several moving cracks. Applied Mathematics and Mechanics (English Edition). 34(12):1535-1542.
Crossref

McEwen AS (2013). The surface of Mars chenges all the time. Is flowing water one of the causes? Scientific American.

Meszaros L, Turcsan T (2014). Development and mechanical properties of carbon fibre reinforced EP/VE hybrid composite systems. periodica polytechnica, Mechanical Engineering. 58(2):127-133.

Mohlmann D, Thomsen K (2011). Properties of cryobrines on Mars. Icarus. 212:123-130.
Crossref

Nakamura T, Ramanujam N, Vaddadi P, Singh RP (2007). Interlaminar Fatigue Growth under Thermal Cycles in Composite Laminate. 16TH International Conference on Composite Materials, Kyoto, Japan.

Pan SD, Zhou ZG, Wu LZ (2013). Basic solutions of multiple parallel symmetric mode-Ó€Ó€Ó€ cracks in functionally graded piezoelectric/piezomagnetic material plane. Applied Mathematics and Mechanics (English Edition). 34(10):1201-1224.
Crossref

Park SY, Choi HS, Choi, WJ, Kwon H (2012). Effect of vacuum thermal cyclic exposures on unidirectional carbon fiber/epoxy composites for low earth orbit space applications. Composites: Part B. 43:726-738.
Crossref

Pasachoff JM (1993). From the Earth to the Universe. Part 2: The Solar System, 11 Mars, Saunders College Publishing, Williamstown, Massachusetts, Fourth Edition, 190-203.

Salotti JM (2011). Simplified scenario for manned Mars missions. Acta Astronautica. 69:266-279.
Crossref

Salotti JM (2012). Revised scenario for human missions to Mars. Acta Astronautica. 81(1):273-287.
Crossref

Suhir E (2012). Human-in-the-loop: likelihood of vehicular mission¬success-and-safety. J. Aircr. 49(1):29-36.
Crossref

Salotti JM, Suhir E (2014). Manned missions to Mars: Minimizing risks of failure. Acta Astronautica. 93:148-161.
Crossref

Schulze-Makuch D, Davies P (2010). To Boldly Go: A One-Way Human Mission to Mars. J. Cosmology. 12:3619-3626.

Shin KB, Kim CG, Hong CS, Lee HH (2000). Prediction of failure thermal cycles in graphite/epoxy composite materials under simulated low earth orbit environments. Compos Part B: Eng. 31:223–235.
Crossref

Song K, Zhang Y, Meng J, Green EC, Tajaddod N, Li H, Minus ML (2013). Structural Polymer-Based Carbon Nanotube Composite Fibers: Understanding the Processing Structure-Performance Relationship. Materials. 6:2543-2577.
Crossref

Sendeckyj GP (1990). Life prediction for resin-matrix composite materials, (Reifsnider, K.L., editor). Fatigue of Composite Materials. Elsevier Science Publishers, 431-483.

Uleck KR (2006). A Hybrid Model for Fatigue Life Estimation of Polymer Matrix Composites. Ph.D. thesis, University of Maryland: 108.

Voicu R (2012). Structural Characterization and Mechanical Behaviour of Carbon Fiber/epoxy Composite for Aeronautical Field. Materiale Plastice. 49(1):34-40.