Journal of
Mechanical Engineering Research

  • Abbreviation: J. Mech. Eng. Res.
  • Language: English
  • ISSN: 2141-2383
  • DOI: 10.5897/JMER
  • Start Year: 2009
  • Published Articles: 118

Full Length Research Paper

Mathematical modeling, simulation and analysis of rice grain movement for design and fabrication of low-cost winnowing machine

Krishna Prasad Shrestha*
  • Krishna Prasad Shrestha*
  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Kavre, Nepal.
  • Google Scholar
Pradeep Parajuli
  • Pradeep Parajuli
  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Kavre, Nepal.
  • Google Scholar
Bivek Baral
  • Bivek Baral
  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Kavre, Nepal.
  • Google Scholar
Bim Prasad Shrestha
  • Bim Prasad Shrestha
  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Kavre, Nepal.
  • Google Scholar


  •  Received: 14 August 2016
  •  Accepted: 09 November 2016
  •  Published: 31 January 2017

References

Accetta K, Fellinger R, Goncalves PL, Musselwhite S, Pelt WPV (2013). "Current Research in Egyptology 2013," in Proceedings of the Fourteen Annual Symposium, United Kingdom.

 

Aurora (2012). Adventuring on Planet Aurora, 13 May 2012. (Online).

 

Bassett N, Brower M, Michel S, Shinew M (2005). "Golf Ball Projectile Motion", EGR 312: Dynamics, 11 November.

 

Chancellor WJ (1981). "Substituting information for energy in agriculture," Trans. ASAE Paper No. 0001- 2351.

 

Dieter GE (2000). Engineering Design, New Delhi: McGraw- Hill Publishing Company Limited.

 

El-Haddad WZ, Sayed-Ahmed IF, Gomaa RB (2008). "Modification of foreign threshing chamber to suit separating green peas crop," in The 15th. Annual Conference of the Misr Society of Ag. Eng. 12-13 March, 2008.

 

Jang C, Kahn N, Langlois L, Liu R, Montanaro G (2014). "Design of a Winnowing Machine for West African Rice Farmers," Department of Bioresource Engineering, McGill University.

 

Kelvin L et. al (2004). Golf Ball Projectile Motion Project.

 

Manandhar GB, Adhikary SK, Sah G (2009). "Sustainable agriculture development and practices in Nepal,". National Agricultural Research Institute (NARI), Nepal Agricultural Research Council (NARC), Khumaltar, Lalitpur, Nepal. Last accessed on, 2.

 

Matousek R (1974). Engineering Design, London: Blakie and sons limited, 1974.

 

Meija DJ (2003). An overview of rice post-harvest technology: use of small metallic silos for minimizing losses. Rome, Italy: FAO.

 

Muhammad US, Abubakar LG, Isiaka M, Davies RM (2013). "Design and evaluation of a cleaning machine," Applied Science Reports, PSCI Publications.

 

Peirson B (2007). Analysis of Golf Ball Motion.

 

Tomomi U, Nauruse M (2008). "Two-dimensional Vortex Simulation of Particulate Airflow Induced by Free Falling Particles.

 

Tovar AA (2009). Air Drag Mathematics Reference Guide, 13 November, 2009.