Journal of
Petroleum and Gas Engineering

  • Abbreviation: J. Petroleum Gas Eng.
  • Language: English
  • ISSN: 2141-2677
  • DOI: 10.5897/JPGE
  • Start Year: 2010
  • Published Articles: 124

Full Length Research Paper

A sensitivity study of relevant parameters on sand production in unconsolidated sandstone reservoirs

Mohamad Tabaeh Hayavi
  • Mohamad Tabaeh Hayavi
  • Department of Petroleum Engineering, Islamic Azad University, Omidiyeh, Iran.
  • Search for this author on:
  • Google Scholar
Mahmood Abedifar
  • Mahmood Abedifar
  • Department of Petroleum Engineering, Islamic Azad University, Omidiyeh, Iran.
  • Search for this author on:
  • Google Scholar


  •  Accepted: 10 January 2016
  •  Published: 30 September 2017

References

Abdideh M, Fathabadi MR (2013). Analysis of stress field and determination of safe mud window. J. Petrol Explor. Prod. Technol. 3:105-110.
Crossref
 

Addis MA (1997). Reservoir Dedletion and its Effect on Wellbore Stability Evaluation. Int. J. Rock Mech. Min. Sci. 34:3-4.

  
 

Alipour TV, Mirzaahmadian Y (2010). Investigation of Sand Production Onset: A New Approach Based on Petrophysical Logs, SPE 150529, In: Proceedings of the SPE Annual Technical Conference and Exhibition, Louisiana, 15–17 February.

  
 

Al-Qahtani M, Rahim Z (2001). A Mathematical Algorithm for Modeling Geomechanical Rock Properties of the Khuff and Pre-Khuff Reservoirs in Ghawar Field. SPE 68194, In: Proceedings of the SPE Annual Technical Conference and Exhibition, Bahrain, 17-20 March.
Crossref

  
 

Al-Shaaibi S, Al-Ajmi A, Al-Wahaibi Y (2013). Three dimensional modeling for predicting sand production. J. Petrol. Sci. Eng. 103:348-363.
Crossref

  
 

Dai ZP, Stauffer H, Carey JW, Middleton RS, Lu Z, Jacobs JF, Hnottavange-Telleen K, Spangle L (2014). Pre-site characterization risk analysis for commercial-scale carbon sequestration. Environ. Sci. Technol. 48:3908-3915.
Crossref

  
 

Fjær E, Holt RM, Horsrud P, Raaen AM, Risne A (2008). Petroleum Related Rock Mechanics, 2nd edition Elsevier, Amsterdam.

  
 

Joseph A, Akubue LC, Ajienka JA, Oriji AB (2012). Sanding Prediction using Rock Mechanical Properties (A Parametric Study), SPE 162945, In: Proceedings of the Nigeria Annual International Conference and Exhibition held in Abuja, Nigeria, 6–8 August.
Crossref

  
 

Khaksar A, Fang Z, Kayes T, Salazar T, Rahman R (2009). Rock strength from core and logs: Where we stand and ways to go. In: Proceedings of the EUROPEC/EAGE Annual Technical Conference and Exhibition, Amsterdam, June 8–11.
Crossref

  
 

Luo W, Xu S, Torabi F (2012). Laboratory Study of Sand Production in Unconsolidated Reservoir, SPE 158619, In: Proceedings of the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8-10 October.

  
 

Mohiuddin MA, Najem NM, Al-Dhaferi YR, Bajunaid HA, Al-Khafji F (2009). Geomechanical Characterization of a Sandstone Reservoir in Middle East—Analysis of Sanding Prediction and Completion Strategy. SPE 120049. In: Proceedings of the SPE Annual Technical Conference and Exhibition, Bahrain, 15–18 March.

  
 

Morita N, Whitfill DL,Fedde OP, Levik TH (1987). Parametric Study of Sand Production Prediction: Analytical Approach, SPE 16990, Presented at the at the 62nd SPE Annual Technical Conference and Exhibition, Dallas, TX, 27-30 September.

  
 

Nabaei N, Shahbazi K, Shadravan A, Moazzeni MR (2009). Artificial Neural Network Modelling Enhances Shear Wave Transit Time, SPE 12158, In: Proceedings of the SPE Annual Technical Conference and Exhibition, Kish Island, 16-20 November.

  
 

Nouri A, Vaziri H, Belhaj H, Islam B (2003). Comprehensive Approach to Modeling Sanding During Oil Production. SPE 81032, In: Proceedings of the SPE Annual Technical Conference and Exhibition, Trinidad, West Indies, 27–30 April.
Crossref

  
 

Perchikolaee SR, Shadizadeh SR, Shahryar K, Kazemzadeh S (2010). Building a Precise Mechanical Earth Model and its Application in Drilling Operation Optimization: A Case Study of Asmari Formation in Mansuri Oil Field. SPE 132204, In: Proceedings of the SPE Annual Technical Conference and Exhibition, 8–10 June.

  
 

Rahman K, Khaksar A, kayes R, Helix K (2008). Minimizing Sanding Risk by Optimizing Well and Perforation Trajectory Using an Integrated Geomechanical and Passive Sand-Control Approach. SPE 116633, In: Proceedings of the SPE Annual Technical Conference and Exhibition, Colorado, USA, 21–24 September.

  
 

Tao Q, Birchwood R, Ghassemi A (2008). Poroelastoplastic Analysis of Factors Controlling Sand Production from aHemispherical Cavity, ARMA 08-306. In: Proceedings of the 42nd US Rock Mechanics Symposium, San Francisco, June 29-July 2.

  
 

Volonté G, Scarfato F, Brignoli M (2010). Sand Prediction: A Practical Finite-Element 3D Approach for Real Field Applications, SPE 134464, In: Proceedings of the SPE Annual Technical Conference and Exhibition, Florence, Italy, 19–22 September .
Crossref

  
 

Wang HF (2000). Theory of linear poroelasticity, Princeton University Press, Princeton.

  
 

Wang J, Wan RG, Settari A, Walters A (2005). Prediction of Volumetric Sand Production and Wellbore Stability Analysis of a Well at Different Completion Schemes, ARMA/USRMS 05-842. In: Proceedings of the Rock Mechanics for Energy, Mineral and Infrastructure Development in the Northern Regions, Anchorage, Alaska, June 25-29.

  
 

Yi X (2003). Numerical and Analytical Modeling of Sanding Onset Prediction. Texas A&M University (Ph.D. thesis).

  
 

Zare-Reisabadi MR, Kaffash A, Shadizadeh SR (2012) Determination of optimal well trajectory during drilling and production based onboreholestability. Int. J. Rock Mech. Min. Sci. 56:77-87.
Crossref

  
 

Zhang L, Cao P, Radha K (2010). Evaluation of rock strength criteria for wellbore stability analysis. Int. J. Rock Mech. Min. Sci. 47(8):1304-1316.
Crossref

  

 

Copyright © 2024 Author(s) retain the copyright of this article.

This article is published under the terms of the Creative Commons Attribution License 4.0

Back to Vol. 8 No. 7
Back to articles
SUBSCRIBE TO RSS
SUBMIT MANUSCRIPT
CONFERENCES