Full Length Research Paper
References
Aghakhani M, Mehrdad E, Hayati E (2011). Parametric Optimization of Gas Metal Arc Welding Process by Taguchi Method on Weld Dilution. Int. J. Model. Optimiz. 1(3):216-220. |
|
|
|
Ananthan SS, Senthil Kumar G, Natarajan U (2012). Vision inspection system for the identification and classification of defects in MIG welding joints. Int. J. Adv. Manuf. Technol. 61(9):923-933. |
|
|
|
Bracarense AQ, Lacerda de Souza RL, Souza Costa MCM, Faria PE, Liu S (2002). Welding current effect on diffusible hydrogen content in flux cored arc weld metal. J. Braz. Soc. Mech. Sci. 24(2):278-285. |
|
|
|
ChotÄ›borský R, Navrátilová M, HrabÄ› P (2011). Effects of MIG process parameters on the geometry and dilution of the bead in the automatic surfacing. Res. Agric. Eng. 57(2):56-62. |
|
|
|
Gomes JHF, Costa SC, Paiva AP, Balestrassi PP (2012). Mathematical Modeling of Weld Bead Geometry, Quality, and Productivity for Stainless Steel Claddings Deposited by FCAW. J. Mater. Eng. Kovacevic R, Huang W (2011). A Laser-Based Vision System for Weld Quality Inspection. Sensors 11(1):506-521. |
|
|
|
Kumar V, Singh G, Yusufzai MZK (2012). Effects of Process Parameters of Gas Metal Arc Welding on Dilution in Cladding of Stainless Steel on Mild Steel. MIT Int. J. Mech. Eng. 2(2):127-131. |
|
|
|
Li Y, Li FL, Wang Q, Xu D, Tan M (2010). Measurement and Defect Detection of the Weld Bead Based on Online Vision Inspection. IEEE Trans. Instrum. Meas. 59(7):1841-1849. |
|
|
|
Mohamat SA, Ibrahim IA, Amir A, Ghalib A (2012). The Effect of Flux Core Arc Welding (FCAW) Processes On Different Parameters. Proc Eng. 41:1497-1501. |
|
|
|
Om H, Pandey S (2014). Effect of Process Parameters on Weld Penetration Shape Factor in ASAW Based Surfacing. Int. J. Innovat. Res. Sci. Eng. Technol. 3(6):13590-13596. |
|
|
|
Palanni PK, Murungan N, Karthikeyan B (2006). Process parameter selection for optimising weld bead geometry in stainless steel cladding using Taguchi's approach. Mater. Sci. Technol. 22(10):1193-1200. |
|
|
|
SAE J444/827/1993 (ISO 11124-3) (1993). Cast Shot and Grit Size Specifications for Peening and Cleaning. |
|
|
|
Sathiya P, Mishra MK, Shanmugarajan B (2012). Effect of shielding gases on microstructure and mechanical properties of super austenitic stainless steel by hybrid welding. Mater. Des. 33:203-212. |
|
|
|
Shoeb M, Parvez M, Kumari P (2013). Effect of MIG Welding Input Process Parameters on Weld Bead Geometry on HSLA Steel. Int. J. Eng. Sci. Technol. 5(1):200-212. |
|
|
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0