Full Length Research Paper
References
Food and Agriculture Organization (FAO) (2010). Global forest resources assessment 2010 |
|
Country report, Kenya. FRA 2010/107, Rome: FAO. |
|
Fehr C, Pasiecznik NM (2006). The potential of chainsaw milling for improving rural livelihoods in Uganda and DR Congo. Policy brief. HDRA, Coventry, UK. |
|
Freud EH, Dabat MH (2000). Atelier de formation sur les methods d'analysedes marches agricoles. Dossier methodologique CIRAD/ICRAF November2000 (Abstract). |
|
Funk JW, Forrer JB, Butler DA, Brunner AG, Maristany CC (1992). Measuring surface roughness on wood: a comparison of laser scanner and stylus tracing approaches. Proceedings of International Society for Optical Engineering. Vol. 1821. |
|
Government of Kenya (GoK) (2007). Kenya Vision 2030. Government of the Republic of Kenya. Nairobi: Government printer. |
|
Guillaume L, Paolo OC, Edouard EM, Richard EA, Robert N (2010). Chainsaw milling in the Congo Basin. European Tropical Forest Research ENetwork. Tropenbos International, Wageningen, the Netherlands. xxii 226 pp. |
|
Holding AC, Roshetko JM (2003). Farm-level timber production: Orienting farmers towards the market. Unaslyva 54(1):48-56. |
|
ISO 3179 (1974). Coniferous sawn timber- nominal dimensions. |
|
ISO 4480: (1983). Coniferous saw logs: Measurement of sizes and determination of volume. |
|
Karuga J (2016). Arid Land Wonder Tree Spurs New Economic Opportunities. CleanLeap. |
|
KFS (2018). A Guide to Melia volkensii Growing in the Dryland Areas of Kenya 2018. Kenya Forest Service, Headquarters, Off Kiambu Road, Nairobi. |
|
Ministry of Environment and Natural Resources (MENR) (2016). National Forest Programme of Kenya. MENR, Nairobi, Kenya. |
|
Muthike GM (2007). Impacts of Integrating technology and Skills on Timber recovery and surface quality in on-farm timber processing in Kenya. (in) IUFRO-All Division 5 Conference, Held in Taipei, Taiwan on 29th October to 2nd November 2007. |
|
Muthike GM (2016). Optimization of on-farm machine design parameters for efficient timber sawing based on empirical approach. Jomo Kenyatta University of Agriculture and Technology. PhD Thesis. |
|
Muthike GM, Kanali CL, Shitanda D (2013). The contribution of Framed Chainsaw System to Improvement of Sawn Timber Quality. International Journal of Current Research 5(1):070-074. |
|
Muthike, GM, Shitanda D, Kanali CL, Muisu FN (2010). Chainsaw milling in Kenya. Chainsaw milling: supplier to local markets, 166. |
|
Pasiecznik N (2010). Sawmilling with chainsaws: a technical overview. Chainsaw milling: Supplier To Local Markets P 3. |
|
Richter K, Feist WC, Knaebe MT (1995). The effect of surface roughness on the performance of finish. Part 1. Roughness characterization and stain performance. Forest Products Journal 45(7-8):91-96. |
|
Roshetko JM, Snelder DJ, Lasco RD, van NM (2008). Futurechallenge: a paradigm shift in the forestry sector. In: Snelder, D.J. and Lasco,R. (eds). Smallholder tree growing for rural development and environmental services. |
|
Wamahiu PW (2008). Trees on farms in Kenya. In: Recent Advances in Forestry Research for Environmental Conservation, Improved Livelihood and Economic Development. Proceedings of the 4th KEFRI Scientific Conference, 6-9 October 2008. Nairobi. |
|
Wekesa L, Muturi G, Mulatya J, Esilaba AO, Keya GA, Ihure S (2012). Economic viability of Melia volkensii (Gurke) production on smallholdings in drylands of Kenya. International Research Journal of Agricultural Science and Soil Science (ISSN: 2251-0044) 2(8):364-369. |
|
Wit m, Van Dam J (2010). Chainsaw milling: supplier to local markets. Tropenbos international, wageningen, the Netherlands. |
|
World Agroforestry Centre (2004). Small-holder Timber Workshop Notes. CD-ROM. Small-holder Timber Workshop, November 29 December 1, 2004, World Agroforestry Centre, Nairobi, Kenya. |
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0