Full Length Research Paper
References
Bakavos D, Prangnell PB (2010) Mechanisms of joint and microstructure formation in high power ultrasonic spot welding 6111 aluminium automotive sheet. Mater. Sci. Eng. A 527:6320–6334. Crossref |
||||
Barbosa C, Dille J, Delplancke JL, Rebello JMA, Acselrad O (2006). A microstructural study of flash welded and aged 6061 and 6013 aluminum alloys, Mater. Characteriz. 57:187-192. Crossref |
||||
Black JT, Kohser RA (2008). Materials and Processes in Manufacturing (10th Ed.), John Wiley & Sons, Inc. | ||||
Boothroyd G, Knight WA (2006). Fundamentals of Machining and Machine Tools, (3rd Ed.), Taylor & Francis. | ||||
Braun R (2006). Investigations on the long-term stability of 6013-T6 sheet. Mater. Characteriz. 56:85–95. Crossref |
||||
Chen YC, Bakavos D, Gholinia A, Prangnell PB (2012). HAZ development and accelerated post-weld natural ageing in ultrasonic spot welding aluminium 6111-T4 automotive sheet. Acta Materialia 60:2816–2828. Crossref |
||||
Demir H, Gündüz S (2009). The effects of aging on machinability of 6061 aluminium alloy. Mater. Des. 30:1480–1483. Crossref |
||||
Florea RS, Solanki KN, Bammann DJ, Baird JC, Jordon JB, Castanier MP (2012). Resistance spot welding of 6061-T6 aluminum: Failure loads and deformation. Mater. Des. 34:624–630. Crossref |
||||
Grover MP (2010). Principles of Modern Manufacturing (4th Ed.), John Wiley & Sons, Inc. | ||||
Grzesik W (2008). Advanced Machining Processes of Metallic Materials, Elsevier, UK. | ||||
Hayat F (2012). Effect of aging treatment on the microstructure and mechanical properties of the similar and dissimilar 6061-T6/7075-T651 RSW joints, Mater. Sci. Eng. A 556:834-843. Crossref |
||||
Kalpakjian S, Schmid SR (2010). Manufacturing Engineering and Technology, Prentice Hall. | ||||
Khalid RH, Ram GDJ, Phanikumar G, Rao KP (2010). Microstructure and tensile properties of friction welded aluminum alloy AA7075-T6. Mater. Des. 31:2375-2380. Crossref |
||||
Meyveci A, Karacan Ä°, Çalıgülü U, DurmuÅŸ H (2010). Pin-on-disc characterization of 2xxx and 6xxx aluminium alloys aged by precipitation age hardening. J. Alloys Compounds 491:278–283. Crossref |
||||
Mrowka-Nowotnik G, Sieniawski J (2005). Influence of heat treatment on the microstructure and mechanical properties of 6005 and 6082 aluminium alloys. J. Mater. Process. Technol. 162-163:367-372. Crossref |
||||
Öztürk F, Sisman A, Toros S, Kilic S, Picu RC (2010) Influence of aging treatment on mechanical properties of 6061 aluminum alloy. Mater. Des. 31:972–975. Crossref |
||||
Petroyiannis PV, Kermanidis AT, Papanikos P, Pantelakis SG (2004). Corrosion-induced hydrogen embrittlement of 2024 and 6013 aluminum alloys. Theor. Appl. Fracture Mech. 41:173–183. Crossref |
||||
Siddiqu RA, Abdullah HA, Al-Belushi KR (2000). Influence of aging parameters on the mechanical properties of 6063 aluminium alloy. J. Mater. Process. Technol. 102:234-240. Crossref |
||||
Stephenson DA, Agapiou JS (2006). Metal Cutting Theory and Practice (2.nd Ed.), Taylor & Francis. | ||||
Tesch A, Pippan R, Trautmann KH, Döker H (2007). Short cracks initiated in Al 6013-T6 with the focused ion beam (FIB)-technology. Int. J. Fatigue 29:1803-1811. Crossref |
||||
Zander J, Sandström R (2008). One parameter model for strength properties of hardenable aluminium alloys. Mater. Des. 29:1540-1548. Crossref |
Copyright © 2024 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0